Best Impact Sockets Set

As an Amazon Associate we earn from qualifying purchases.

The best impact sockets set for most garage and mower work is a 1/2 inch drive set that covers both SAE and metric sizes, includes deep and shallow sockets, and comes in a case you can keep organized. We read eight impact socket set listings on 2026-10-22 and compared what each one states: drive size, piece count, size range, steel, point count, extensions and warranty. Smaller 3/8 inch sets suit tighter spaces, and a single-size 1/2 inch axle nut set is a narrow tool for a narrow job. The listings disagree on a few labels, and we flag those differences below.

Quick answer

• For general garage and mower work, a 1/2 inch drive set with 65 pieces covers the widest size range in this group: the VEVOR, NEIKO and BOEN listings each state SAE sizes from 3/8 inch to 1-1/4 inch and metric sizes from 10 to 24 mm.
• For tighter spaces and lighter work, the 3/8 inch drive sets are the smaller option: the Klein Tools 44-piece and the CASOMAN 49-piece.
• For large axle nuts, the SUNHZMCKP 8-piece set covers only 1-1/4 to 1-3/4 inch SAE sizes, so it is a specialty purchase.
• Check the drive system line before you buy. The DEWALT listing’s attribute table reads Torx, which does not match the 6-point sockets its title and included list describe.

Specs side by side

Each row uses the figures the listing states. “not stated” means the listing is silent. Where two parts of a listing disagree, the table shows the field the figure came from, and the text below explains the conflict.

Model (as listed)	Drive size	Pieces	Size range	Points	Steel	Item weight	Warranty
DEWALT DWMT74739	1/2 in	23	SAE 7/16 to 1 in; metric 13 to 24 mm	6-point (field)	CR-440, heat treated (features)	8 pounds	lifetime, does not cover abuse
VEVOR 65 piece	1/2 in	65	3/8 to 1-1/4 in; 10 to 24 mm	6 point (highlight); hex drive (features)	Cr-V (field)	32 pounds	not stated
NEIKO 02448A	1/2 in	65	SAE 3/8 to 1-1/4 in; metric 10 to 24 mm	6-point (features)	Cr-V, black phosphate	not stated	not stated
Klein Tools 65148HD	3/8 in	44	SAE 5/16 to 3/4 in; metric 8 to 19 mm	not stated	chrome molybdenum (field)	11.2 pounds	call vendor
CASOMAN CS041	3/8 in	49	SAE 5/16 to 3/4 in; metric 8 to 22 mm	6-point (title)	Cr-V (50BV30)	4160 g	standard limited lifetime
BOEN BS-129065R	1/2 in	65	SAE 3/8 to 1-1/4 in; metric 10 to 24 mm	6-point (features)	Cr-V, manganese phosphate	not stated	not stated
SUNHZMCKP 8 piece	1/2 in	8	SAE 1-1/4 to 1-3/4 in	6-point (title)	chrome molybdenum (field)	not stated	not stated
DISEN 19 piece	1/2 in	19 (title); field reads 1	deep sockets 3/8 to 1-1/2 in	6-point (field)	Cr-V (field)	not stated	not stated

Piece count and size coverage

Piece count alone does not tell you what a set covers, so we counted the sizes each listing names. The formula is simple: count the SAE sockets, count the metric sockets, then add the accessories the listing lists. The DEWALT set, for example, lists 10 SAE sockets from 7/16 inch to 1 inch, 10 metric sockets from 13 to 24 mm, plus a 5 inch impact extension, a drill adapter and a quick-release ratchet, which makes 23 pieces in all.

• DEWALT: 10 SAE sockets plus 10 metric sockets, plus three accessories, makes 23 pieces.
• NEIKO: 58 sockets plus 3 extension bars, a ratchet, a universal joint and 2 adapters, makes 65 pieces as listed.
• VEVOR: 29 deep and 29 standard sockets, plus 3 extension bars, a wrench and 3 adapters, makes 65 pieces as listed.
• DISEN: 19 deep sockets in the title, but its Number of Pieces field reads 1, so only the title can be checked against the list.

Size coverage matters more than the count. The 65-piece sets cover the most sizes, while the 8-piece SUNHZMCKP set covers only the largest SAE sizes.

Buying checklist

• Match the drive size to the square drive on your impact tool first, because each listing names one drive size per set.
• Count the pieces from the included list rather than the title, since the DISEN listing’s count field disagrees with its title.
• Check the point count. Seven of the eight listings state a 6-point design, and the Klein listing does not state one.
• Look for a case with a lock or labeled slots if you want sizes kept together. The NEIKO, BOEN and Klein listings describe organized storage.
• Read the warranty line before you order. Only the DEWALT and CASOMAN listings state a warranty length, and the Klein listing tells you to call the vendor.

The eight listings, one by one

The sections below follow the order of the table and are not ranked. Each one lists the figures from the listing, a skip condition and one limit the listing leaves open.

DEWALT DWMT74739 23-piece 1/2 inch set

The DEWALT set is a 23-piece combination of 1/2 inch drive impact sockets with an extension, a drill adapter and a quick-release ratchet. The listing says the sockets are impact-ready and use heat treated CR-440 steel, and it notes DirectTorque technology that it says helps prevent rounding of fasteners. The listing also calls the set O-ring and retaining pin compatible, with laser-etched size markings.

• Drive size: 1/2 in
• Pieces: 23
• Sizes: SAE 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1 in; metric 13 to 19, 21, 22 and 24 mm
• Steel: heat treated CR-440 (features)
• Item weight: 8 pounds
• Warranty: lifetime warranty, which does not cover abuse

Skip it if your drive system matters to you, because the attribute table reads Torx and Bit Application automotive, which conflicts with the 6-point socket description. The listing does not say which of the two is correct.

View on Amazon

VEVOR 65-piece 1/2 inch set

The VEVOR set ties for the largest piece count in this group, and it comes with a metal toolbox. The listing describes Cr-V alloy steel, laser-etched size markings and a hexagonal drive design that it says reduces pressure on fasteners. The set includes 29 deep and 29 standard sockets, three extension bars in 3, 5 and 10 inch lengths, a 72-tooth ratchet, an impact universal adapter and three drive adapters.

• Drive size: 1/2 in
• Pieces: 65
• Sizes: 3/8 to 1-1/4 in and 10 to 24 mm, per the title
• Steel: Cr-V alloy steel (field)
• Item length: 21.06 inches
• Item weight: 32 pounds
• Warranty: not stated

Skip it if the weight of the case matters to you, since the listing gives 32 pounds for the complete set. The Item Highlight calls the drive 6 point and the features call it hexagonal, so the listing reads both ways.

NEIKO 02448A 65-piece 1/2 inch set

The NEIKO set is a complete shallow and deep kit in a plastic case that the listing says has lever locks to prevent accidental opening. The listing describes drop-forged Cr-V steel with laser-etched markings on a black phosphate finish, and it says the 6-point design prevents round-off on nuts and bolts under high torque.

• Drive size: 1/2 in
• Pieces: 65 (58 sockets, plus accessories)
• Sizes: SAE 3/8 to 1-1/4 in; metric 10 to 24 mm; deep and shallow
• Points: 6-point (features)
• Item length: 24 millimeters (field)
• Steel: Cr-V, black phosphate finish
• Warranty: not stated

Skip it if you want a stated warranty, because the listing does not give one. The listing describes the case closely, but it does not state the case’s weight or dimensions.

Klein Tools 65148HD 44-piece 3/8 inch set

The Klein set is a 3/8 inch drive kit with both deep-well and shallow sockets, a color-coded size system and a removable socket organizer. The listing describes cold-forged, heat-treated chrome molybdenum steel and says it delivers impact-rated performance for high torque applications. It includes a 3 inch impact adapter, a swivel adapter and 3 and 6 inch extensions.

• Drive size: 3/8 in
• Pieces: 44
• Sizes: SAE 5/16 to 3/4 in; metric 8 to 19 mm
• Steel: chrome molybdenum (field)
• Drive system: internal hex (field)
• Item weight: 11.2 pounds
• Item length: 13.85 inches
• Warranty: the listing says to call the vendor for warranty information

Skip it if you need sockets above 3/4 inch in SAE sizes, because the set stops there. The listing also does not state the point count, so compare it against the 6-point sets before you decide.

View on Amazon

CASOMAN CS041 49-piece 3/8 inch set

The CASOMAN set has 49 pieces in a 3/8 inch drive, with deep and shallow 6-point sockets and an attachment port that the listing says is compatible with traditional ratchets. The sockets are made from chrome vanadium steel with a corrosion-resistant black phosphate finish, and the listing says they meet or exceed ANSI performance standards.

• Drive size: 3/8 in
• Pieces: 49
• Sizes: SAE 5/16 to 3/4 in; metric 8 to 22 mm; deep and shallow
• Points: 6-point (title)
• Steel: Cr-V (50BV30), black phosphate finish
• Item weight: 4160 g
• Item length: 6 inches
• Warranty: standard limited lifetime

Skip it if you need a 1/2 inch drive, since this set is for 3/8 inch work. The listing lists an adapter from 3/8 inch to 1/4 inch but does not say what the adapter is used for.

BOEN BS-129065R 65-piece 1/2 inch set

The BOEN set is a 65-piece 1/2 inch kit whose size markings are yellow paint in grooves, not laser etching. The listing says the grooves keep the paint from scratching and grease buildup. It includes three extension bars, a 72-tooth quick-release ratchet, a universal joint, two adapters and a plastic case, and the listing says it meets ANSI/ASME B107.110-2020 for impact sockets.

• Drive size: 1/2 in
• Pieces: 65
• Sizes: SAE 3/8 to 1-1/4 in; metric 10 to 24 mm; deep and shallow
• Points: 6-point (features)
• Steel: drop-forged Cr-V (features); manganese phosphate finish (field)
• Drive end: square (field)
• Item weight: not stated
• Warranty: not stated

Skip it if you want a weight figure, because the listing does not give one. The listing says each socket carries a temporary oil and a black phosphate coating, so wipe the oil off before use, as the features note advises.

SUNHZMCKP 8-piece 1/2 inch axle nut set

The SUNHZMCKP set is a narrow tool. It has eight 6-point SAE sockets from 1-1/4 to 1-3/4 inch, an extra deep 3.15 inch depth and a plastic toolbox. The listing describes chrome molybdenum steel with a manganese phosphate coating and a sandblasted finish, and it says the set suits large equipment maintenance and car repair.

• Drive size: 1/2 in
• Pieces: 8
• Sizes: SAE 1-1/4, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-11/16 and 1-3/4 in
• Points: 6-point (title)
• Depth: 3.15 inches (features)
• Steel: chrome molybdenum, manganese phosphate coating
• Item weight: not stated
• Warranty: not stated

Skip it if you need general mechanics sizes, because the set covers only the largest SAE sizes. The listing does not state a warranty and does not describe a metric size range.

DISEN 19-piece 1/2 inch set

The DISEN set is 19 deep 6-point sockets from 3/8 to 1-1/2 inch, in a storage case. The listing describes Cr-V alloy steel and names wheel lug nuts on trucks and RVs as a typical use. The title says 19 pieces, but the Number of Pieces field reads 1, so the title is the figure to rely on.

• Drive size: 1/2 in
• Pieces: 19 (title); the Number of Pieces field reads 1
• Sizes: deep sockets from 3/8 to 1-1/2 in, SAE
• Points: 6-point
• Steel: Cr-V alloy (features)
• Item weight: not stated
• Warranty: not stated

Skip it if you need metric sizes, because the listing names only SAE sizes. The lug nut use it describes is a single application, so check the sizes against your own nuts first.

How we chose

We searched Amazon for the keyword on 2026-10-22 and read the first page of results. We kept sets that are sold as impact socket sets for a drill, impact driver or impact wrench, and we left out nut driver kits, bit sets, magnetic driver sets and single loose sockets. We picked a spread of drive sizes, piece counts and size ranges so the list covers 3/8 inch and 1/2 inch drives, SAE and metric sizes, deep and shallow sockets, and one specialty axle nut set. The sections are not ranked, and each listing was read once.

What we could not verify

We could not verify any hardness, torque figure or fit for a particular impact wrench. The listings describe their steel and heat treatment in their own words, and we did not check those descriptions against an independent source. The BOEN listing names an ANSI/ASME standard and the CASOMAN listing says it meets ANSI performance standards, but these are listing claims. We also could not confirm that the size markings stay readable after months of grease exposure, which several listings describe in the features.

What the sources do not say

The listings do not state a warranty for the VEVOR, NEIKO, BOEN, SUNHZMCKP or DISEN sets. The Klein listing does not give a point count, and the BOEN listing gives no weight. The DISEN listing’s Number of Pieces field reads 1 while its title says 19, and the DEWALT attribute table reads Torx while the rest of the listing describes 6-point sockets. None of the listings say whether the cases are sold as replacements or whether a single socket can be ordered from the same set.

FAQ

Do I need impact sockets for an impact wrench?

The listings that describe their sockets as impact-rated say so in the title or features, and those are the sets to use with an impact tool. Check the wording on any listing before you substitute a standard hand socket, because the listings you read do not compare the two. For battery platform questions on impact tools, see our guide to DeWalt leaf blower batteries.

Which drive size should I buy?

The 1/2 inch sets in this group cover the widest range of sizes, and the VEVOR, NEIKO and BOEN listings state SAE sizes up to 1-1/4 inch. The 3/8 inch Klein and CASOMAN sets are smaller and lighter, and their SAE ranges stop at 3/4 inch. Before you choose a size for mower blade bolts, see our Black and Decker lawn mower blade guide.

What does 6-point mean on a socket?

The DISEN listing says a 6-point socket contacts and grips the stronger flat sides of the nut or bolt head, not the weaker corners. Most listings here describe their sockets as 6-point, and the NEIKO and BOEN listings say the design prevents round-off under high torque. The Klein listing does not state its point count, so confirm it before you buy.

Do I need both deep and shallow sockets?

The listings do not explain the difference in detail. The NEIKO, BOEN and Klein listings include both profiles, and the DISEN listing names deep sockets only, so choose the profile that matches the work you do.

Why do some piece counts not match the title?

The DISEN listing’s title says 19 pieces, but its Number of Pieces field reads 1. Listing fields are filled in by the seller, so the title and the field can disagree. Count the pieces yourself from the included list before you rely on either figure.

What warranty do these sets state?

The DEWALT listing states a lifetime warranty that does not cover abuse, and the CASOMAN listing states a standard limited lifetime. The Klein listing tells you to call the vendor, and the VEVOR, NEIKO, BOEN, SUNHZMCKP and DISEN listings state no warranty length.

Bottom line

For most garage and mower work, buy a 1/2 inch drive set with both SAE and metric sizes and a case, then confirm the piece count, drive system and warranty on the listing before you order.

Sources

• DEWALT Impact Socket Set with Ratchet, Metric/SAE, 1/2″ Drive, 23-Piece Set with Case (DWMT74739) (opened 2026-10-22)
• VEVOR 1/2″ Drive Impact Socket Set 65 Piece, 3/8″ to 1-1/4″ and 10-24mm (opened 2026-10-22)
• NEIKO 02448A 1/2″ Drive Master Impact Socket Set, 65 Piece, Standard SAE (3/8″-1-1/4″) Metric (10-24 mm) Sizes (opened 2026-10-22)
• Klein Tools 65148HD KNECT Deep-Well and Shallow Impact Socket Set, 3/8-Inch Drive, SAE and Metric, 44-Piece Tool Set (opened 2026-10-22)
• CASOMAN 3/8″ Drive Impact Socket Set, 49 Piece Standard SAE and Metric Sizes, 6 Point, Cr-V Steel Socket Set (opened 2026-10-22)
• BOEN 1/2″ Drive Impact Socket Set, 65-Piece Standard SAE (3/8″ to 1-1/4″) & Metric (10mm-24mm) (opened 2026-10-22)
• SUNHZMCKP 1/2″ Drive Deep 6-Point Impact Socket Set, 8-Piece Standard SAE Spindle Axle Nut Impact Socket Set (opened 2026-10-22)
• DISEN 19 Pcs 1/2″ SAE Impact Socket Set (opened 2026-10-22)