Best Weed Eater Accessories for Trimming and Edging
As an Amazon Associate we earn from qualifying purchases.
Weed eater accessories cover the parts and add-ons that keep a string trimmer working and make it easier to use: replacement trimmer heads, cutting blades, eyelets, handle extensions and storage racks. Most of the items in this roundup are consumables or fittings you replace over time, so the right choice depends on what your trimmer takes and how you use it. This guide compares eleven accessories from their listings, grouped by type, so you can match a part to your trimmer and your yard.
Quick answer
- For a string head replacement, look for a steel wire line head. The listings for the Myuiao 3-pack, RANYUNSYZ 4-pack and Akenuoke 20-piece set describe steel wire line heads with a center hole of about 0.2 inch.
- For plastic cutting blades on a head that uses them, the Huakaile 60-piece sets and HARFINGTON 40-piece set list 85 mm or similar plastic blades with a center hole for a head.
- For a more comfortable grip, the Ecmln and LISINUO handle extensions are listed as fitting common straight shaft trimmers, with the LISINUO including three rubber inserts.
- For storage on a trailer, the Buyers Products LT10 rack holds up to three trimmers and is listed with locks and vinyl-coated hooks.
How to choose a weed eater accessory
Start with your trimmer. Most accessories in this list are sold as universal fits, but “universal” means a range of trimmers, not every trimmer. Check the center hole size, the shaft diameter and the head type before you buy. The Akenuoke listing says its heads fit a bore of 5 to 5.5 mm, and it notes you can drill a bigger hole if your trimmer needs one. The Ecmln handle extension says a 26 mm trimmer shaft needs a rubber washer in the clamp, while a 28 mm shaft does not. The LISINUO handle includes rubber inserts sized 25 mm, 26 mm and 28 mm for a secure fit.
Next, decide between a line head and a blade head. A string head holds a steel wire line and is the replacement most people reach for when the head wears out. Plastic blades sit in a head that takes them and cut weeds with a serrated edge. These are different parts, so do not buy one for the other. The listings for the plastic blades say they fit lawn mower and trimmer heads, while the string heads say they fit most electric and standard string trimmers.
Finally, consider quantity. Several listings sell packs of 3, 4, 5, 20, 40 or 60 pieces. A larger pack lowers the cost per piece, but plastic blades and small heads are easy to lose, so buy a size you will use within a season.
Installation basics
Most of the replacement items here are installed with a hex nut or a screw through the center hole. The HUAREW listing describes placing the blade in the holder groove, pressing so the top of the groove is flush with the blade surface, and tightening the hex nut clockwise with a hex wrench. The Huakaile listing gives a similar sequence for its plastic blades. The Akenuoke listing describes putting the blade into the groove, passing the screw through the middle hole and tightening with an Allen wrench. Always disconnect or power off the trimmer before you change a head or blade.
The trailer rack is a different kind of job. The Buyers Products LT10 mounts to an open-style trailer with an easy snap-in design and includes mounting hardware. Its listing says the rack is made of powder-coated steel with long-lasting stainless steel springs and vinyl-coated hooks to protect trimmers while the trailer is moving.
Product roundup
1. Buyers Products LT10 Landscape Trailer Trimmer Rack
The LT10 is a rack for an open landscape trailer. It holds up to three trimmers and is made of black powder-coated steel. The listing describes vinyl-coated hooks that protect trimmers from scratches while the trailer is in motion, long-lasting stainless steel springs, a one-hand snap-in design, and mounting hardware included. The rack includes locks to keep trimmers secured, but the padlock is not included. The brand, founded in 1946, is listed for truck and trailer equipment. This is a storage accessory, not a trimmer part, so it suits anyone hauling several trimmers on a trailer.
2. Garosa 10-Piece Universal Trimmer Eyelets
The Garosa set is ten metal trimmer head eyelets, which are the small sleeves that line the cutting line exit on some heads. The listing describes premium metal for longer life and says the eyelets fit most trimmer heads. It also asks buyers to allow for a 1 to 3 cm difference from manual measurement, so check your head before ordering. An eyelet is a small part, so it suits a user who replaces the sleeve on a head rather than the whole head.
3. HUAREW 40-Piece Red Plastic String Trimmer Blades
The HUAREW set is 40 red plastic cutting blades. The listing describes a high-quality plastic blade that is waterproof, lightweight and resistant to breaking, with gear-shaped edges to improve cutting. The pack includes an installation sequence using a hex nut and hex wrench. The listing says the blades fit most lawn mowers and can be used to mow gardens and lawns. The blades are small, so a 40-piece set gives you a supply of spares for a season.
4. Huakaile 60-Piece Plastic Trimmer Blades, Black
The black Huakaile set is 60 plastic blades. The listing gives each blade as 5.47 by 1.30 inches (139 by 33 mm) with a 0.2-inch (5 mm) center hole. The blades have a jagged edge for cutting weeds, and the listing describes them as waterproof, wear resistant and suitable for most small trimmers and hand lawn mowers. The listing says one blade or more can be installed on the head. The same product is also listed in red and blue colorways with the same description, so the choice is color only.
5. Ecmln Aluminum Weed Eater Handle Extension
The Ecmln handle is a pair of aluminum handle extensions with a bracket clamp. The listing says the handle attaches to the trimmer shaft and gives more leverage, which lets the user stand more upright while trimming. It is made of lightweight alloy aluminum and is described as suitable for most commercial and residential trimmers. The clamp fit depends on the shaft: the listing says a 26 mm shaft needs a rubber washer in the bracket, while a 28 mm shaft fits the clamp directly. The set is listed in silver.
6. PurYupearl 5-Piece Black Replacement String Blades
The PurYupearl set is five black replacement string blades for cordless weed wackers and brush cutters. The listing describes a universal design and reinforced material, and it says the blades install with a quick-mount design without special tools. The listing gives no size for the blade or hole, so check the diameter of your trimmer head before ordering. The package is listed as five heavy-duty blades for extended sessions.
7. Myuiao 3-Piece Universal Steel Wire Trimmer Head
The Myuiao set is three black replacement trimmer heads that use steel wire line. The listing says they fit most standard string trimmers and weed eaters, and it gives each head as 1 by 1 by 0.2 inches. The steel wire line is described as durable and consistent in use. The listing notes simple installation with no special tools, which makes this a practical set for keeping a backup head in the shed.
8. Akenuoke 20-Piece Steel Wire Weed Eater Blade Set
The Akenuoke set has 20 steel wire heads with a center bore of about 0.2 inch. The listing says the shell is nylon with a metal steel wire inside and describes the heads as durable and light. It states the heads fit a weed eater with a 5 to 5.5 mm bore, and that you can drill a larger hole in the middle to fit another trimmer. Installation uses an Allen wrench and a screw through the center hole. The listing recommends buying the accessory that matches your trimmer size.
9. RANYUNSYZ 4-Piece Black Steel Wire String Trimmer Heads
The RANYUNSYZ set is four black replacement heads with wire rope or steel wire line. The listing describes a universal fit for most string trimmers, including gas-powered and electric models, and says the steel line resists breaking and wear better than traditional nylon string. The listing gives no dimensions for the heads, so confirm the hole size and shaft fit before you buy. It is a direct replacement for a worn head, according to the listing.
10. BWESOO 5-Piece Cordless Trimmer String Blades
The BWESOO set is five replacement string blades for cordless weed wackers and electric brush cutters. The listing describes a quick-change design and sharp edges for cutting grass and light weeds. It is aimed at battery-powered trimmers, and the listing gives no hole size or head dimension. Check the fit on your trimmer before you order, since the listing does not give a size.
11. HARFINGTON 40-Piece Plastic Trimmer Blades
The HARFINGTON set is 40 red plastic blades. The listing gives a total length of 85 mm (3.35 inches), a width of 21.5 mm (0.85 inch) and a hole diameter of 5 to 10 mm. The blade is described as an adaptive guide-groove design that discharges cut weeds along the groove. The listing also says the blades must not be used on tree branches, hard plastics or metal, to avoid blade breakage or motor overload. The listing notes that manual measurement may have small errors.
Review: Ecmln handle extension in more depth
Of the accessories in this roundup, the Ecmln handle extension is the one most people will use every time they trim. It attaches to the trimmer shaft with a bracket clamp, and its listing says the extension lets you stand more upright. The handle is aluminum, which keeps the added weight low, and the listing describes it as suitable for most commercial and residential trimmers.
The fit is the main thing to check. The listing says a 26 mm shaft needs a rubber washer inside the bracket, and a 28 mm shaft fits the clamp without one. Measure the straight shaft of your trimmer before ordering. If the clamp feels loose after fitting, the listing’s advice on the washer is the first thing to check. The product is a pair, so it can be fitted to a second trimmer if you have one.
A close alternative in the same category is the LISINUO handle extension, which the listing describes as fitting most straight-shaft string trimmers, wackers and edgers. It includes three rubber inserts in 25, 26 and 28 mm so you can build a secure fit. The LISINUO is an orange unit, and the listing states the handle does not replace the trimmer. If your trimmer shaft size is not clear, the three-insert design may suit you better.
FAQ
What is the difference between a string head and a plastic blade?
A string head holds a length of wire line that feeds out as the head spins. A plastic blade is a small, sharp piece that sits in a head designed for blades and cuts weeds with its edge. The listings in this roundup treat them as separate parts, so buy the one your head is built for.
How do I know which hole size to buy?
Measure the center hole or the shaft of your trimmer head before ordering. The Akenuoke listing gives a 5 to 5.5 mm bore, and the HARFINGTON listing gives a 5 to 10 mm hole range. Several listings say the fit depends on your trimmer, so the measurement is the safest check.
Can I use a plastic blade on any trimmer?
No. The blade sets in this roundup are described for specific trimmer heads that take blades. The HUAREW and Huakaile listings describe blades that fit into a head with a holder groove and a hex nut. Check that your head has the matching holder before you buy a blade set.
Do I need a special tool to install these?
Most items list a simple install. The Huakaile and HUAREW listings use a hex wrench, and the Akenuoke listing uses an Allen wrench. The Myuiao and RANYUNSYZ listings say no special tools are needed. The Ecmln handle uses a bracket clamp that is tightened by hand or with the clamp hardware.
Is a trailer rack a weed eater accessory?
It is a storage accessory for a trailer, not a trimmer part. The Buyers Products LT10 holds up to three trimmers and includes locks and mounting hardware. Buy it if you haul trimmers on an open trailer and want them kept secure and off the floor.
How long do these parts last?
The listings give no service life figures. Several describe the plastic blades as durable and wear resistant, and the steel wire heads as more durable than nylon line. The listings do not state a time or number of uses, so judge wear by how the blade or line looks after use.
Bottom line
Choose by the part you need to replace. For a worn string head, start with the Myuiao 3-piece or Akenuoke 20-piece steel wire sets and check the hole size first. For plastic cutting blades, the Huakaile 60-piece set and HARFINGTON 40-piece set are the largest packs. For comfort, the Ecmln handle extension is the simplest fit to check. For hauling, the Buyers Products LT10 keeps up to three trimmers secured.
Related reading
For help choosing the trimmer itself, read Top 10 Battery Powered Weed Eaters: 6 Real Picks Compared. If you run a Ryobi trimmer, see Best Ryobi ONE+ String Trimmers Compared for the matching head options.
