Best Table Saw

As an Amazon Associate we earn from qualifying purchases.

The person typing “best table saw” wants a saw to rip and crosscut lumber and sheet goods for a jobsite or home shop, and wants the power source, rip capacity and what comes in the box before buying. The listings below do not rank the saws for accuracy or durability. They state power, motor, blade size, rip and depth figures, and what is included. Five listings say corded in so many words, one says battery powered, and the rest give an amp rating or a title without a power-source line. Where a listing is silent, the table says not stated.

Quick answer

Corded saws with a stand named in the title and a stated rip figure: the DEWALT DWE7485WS and the SKIL TS6338-00.
Widest stated rip among the portable saws: the SKIL TS6307-00, at 25.5 inches to the right of the blade. Its folding stand is built into the legs.
Battery power: the BOSCH GTS18V-08N is the only battery-powered saw in this set. It is a bare tool, and its listing says the core18v batteries are sold separately.
Check the stand before you buy. The SKIL TS6308-00 title says its stand is sold separately.

The listings side by side

The table uses only the figures each listing states in the text we read. “Not stated” means the text we read is silent on that item. It does not mean the saw lacks the feature.

Saw	Power, as stated	Blade	Rip capacity, as stated	Depth at 0 degrees	Stand or box contents
SKIL TS6307-00	Corded electric, 15 amp	10 inch	25.5 in right, 14 in left	3.5 in	Integrated folding stand
DEWALT DWE7485	Not stated; 120 volt	8-1/4 inch	24.5 in	Not stated	Not stated
DEWALT DWE7485WS	Corded electric, 15 amp	8-1/4 inch	24.5 in	Not stated	Stand included (title)
SKIL TS6338-00	Corded, 15 A	8-1/4 inch	24.5 in right, 12 in left	2-1/2 in	Folding stand (title)
SKIL TS6308-00	Corded, 15A	8-1/4 inch	24.5 in right, 12 in left	2-1/2 in	Stand sold separately (title)
BOSCH GTS18V-08N	Battery powered, 18V	8-1/4 inch	Not stated	Not stated	Bare tool; batteries sold separately
JET ProShop II JPS-10	Corded electric, 120V single-phase	10 inch	52 inch (title)	Not stated	Not stated
Hoteche 10-inch	Electric (title), 15-amp motor	10 inch	Not stated	Not stated	Stand and extendable table (title)
Garvee 10-inch	Not stated; 15 Amp motor	10 inch	Not stated	Not stated	Stand and push stick (title)
WORX WX572L	Not stated; 5.5 Amp (title)	Not stated	Not stated	Not stated	Five blades listed; list cut off in our text

The saws, one by one

Each section gives the figures from that listing, then one skip rule tied to a figure the listing states. The listing text files behind each section were read on 2026-10-22.

SKIL TS6307-00 10-Inch Jobsite Table Saw With Folding Stand

The TS6307-00 has the largest stated rip to the right of the blade among the portable saws in this set, at 25.5 inches. The listing describes a corded 10-inch saw whose folding legs form the stand, with rack and pinion fence rails listed first among its features. The dust port elbow redirects dust to a container. The listing states a 3.5-inch cut at 0 degrees and a 2.5-inch cut at 45 degrees, and it says the saw has a safety anti-restart switch in case of power outages.

Power: corded electric; 15 amp (tool current rating in the listing)
Blade: 10 inch, 24-tooth carbide, per the product description
Depth of cut: 3.5 inches at 0 degrees; 2.5 inches at 45 degrees
Rip: 25.5 inches right of the blade; 14 inches left
Dado: maximum 5/8 inch; the listing says a dado insert needs an 8 inch dado blade set
Weight and warranty: not stated in the text read

View on Amazon

Skip if you need a cut deeper than 2.5 inches at a 45-degree bevel, the figure the listing states for that angle.

DEWALT DWE7485 15 Amp 8-1/4 Inch Compact Portable Jobsite Table Saw

The DWE7485 is the DEWALT compact saw whose title does not mention a stand. The listing describes a Site-Pro Modular Guarding System that adjusts without tools, a metal roll cage base for jobsite durability, and on-board storage for the guard, fence, wrenches and miter gauge. It gives 24.5 inches of rip capacity for ripping 4×8 plywood or OSB sheets, and it states a product voltage of 120. The text we read does not say whether a stand is in the box.

Blade: 8-1/4 inch (title)
Motor: 15 amp (title)
Rip capacity: 24.5 inches (listing)
Voltage: 120 (listing)
Fence: rack and pinion telescoping rails (listing)
Stand, weight and warranty: not stated in the text read

Skip if you need a stand in the box. Neither the title nor the listing text we read names one; the next listing is the stand version.

DEWALT DWE7485WS Portable Table Saw With Stand

This is the stand version of the DWE7485. Its title names the stand and angle cuts up to 48 degrees, and the listing gives 24.5 inches of rip capacity for ripping 4×8 plywood or OSB sheets. The listing says the saw has a blade brake, a power-loss reset that prevents accidental restarts after a power disruption when the tool is left in the on position, and rack and pinion telescoping fence rails. The on-board storage holds the blade guard assembly, a non-through cut riving knife, anti-kickback pawls, blade change wrenches, a miter gauge and a push stick.

Power: corded electric (listing)
Motor: 15 amp, 5800 RPM (product description)
Blade: 8-1/4 inch (title)
Angle cuts: up to 48 degrees (title)
Rip capacity: 24.5 inches (listing)
Stand: included (title)
Voltage, weight and warranty: not stated in the text read

View on Amazon

Skip if you already own a stand you want to keep, since this listing is for the saw with its stand.

SKIL TS6338-00 8-1/4-Inch Compact Portable Jobsite Table Saw With Folding Stand

The TS6338-00 is a corded 8-1/4 inch saw with a folding stand named in its title. The listing states a maximum depth of cut of 2-1/2 inches at 0 degrees and a rip of 24.5 inches to the right of the blade and 12 inches to the left. It names an aluminum table with a 24-1/2-inch rip capacity and a safety switch. It also says the saw is portable for easy transportation and storage.

Power: corded (listing)
Motor: 15 A (listing)
Blade: 8-1/4 inch (title)
Depth of cut: 2-1/2 inches at 0 degrees (listing)
Rip: 24.5 inches right of the blade; 12 inches left (listing)
Table: aluminum (listing)
Stand: folding stand (title)
Weight and warranty: not stated in the text read

Skip if you need a cut deeper than 2-1/2 inches at 0 degrees, since the listing gives that figure as the maximum.

SKIL TS6308-00 8-1/4-Inch Compact Portable Jobsite Table Saw

The TS6308-00 carries the same depth, rip and motor figures as the TS6338-00 above. The difference is in the title: the stand, SFS0001, is sold separately. If you already own that stand, this is the same saw without a stand in the box. The text we read does not give a weight or a warranty for it.

Power: corded (listing)
Motor: 15A (listing)
Blade: 8-1/4 inch (title)
Depth of cut: 2-1/2 inches at 0 degrees (listing)
Rip: 24.5 inches right of the blade; 12 inches left (listing)
Stand: sold separately (title)
Weight and warranty: not stated in the text read

Skip if you do not have a stand, because the title says the stand is not included.

BOSCH GTS18V-08N PROFACTOR 18V 8-1/4 In. Portable Table Saw (Bare Tool)

This is the only battery-powered saw in the set, and its title says it is a bare tool. The listing says the brushless motor delivers 5,500 rpm and that the saw uses core18v high power batteries, which are sold separately. The listing describes a single-hand carry design for moving it around a jobsite, and a rack-and-pinion dial for fence adjustment without tapping the fence into place. The text we read does not give a rip capacity or a depth of cut for this saw, so those cells in the table say not stated.

Power: battery powered, 18V (title and listing)
Blade: 8-1/4 inch (title); carbide blade material (listing)
Speed: 5,500 rpm (listing)
Battery and charger: bare tool; batteries sold separately (title and listing)
Rip capacity and depth of cut: not stated in the text read
Weight and warranty: not stated in the text read

Skip if you do not already own a core18v battery and charger, since the saw is sold as a bare tool.

JET ProShop II 10-Inch Table Saw, 52-Inch Rip (JPS-10)

The JET has the largest stated rip in this set, 52 inches according to its title, and it is the only saw here whose title states horsepower: 1-3/4 HP on 120V single-phase power. The listing names a quick-release riving knife, a redesigned arbor lock for faster blade changes, an improved dust shroud around the blade, and a single-belt design that the listing says reduces vibration. It also says the motor reset switch sits on the power switch instead of the motor.

Power: corded electric, 120V single-phase (title and listing)
Motor: 1-3/4 HP (title)
Blade: 10 inch (title); alloy steel blade material (listing)
Rip: 52 inch (title)
Riving knife: quick-release (listing)
Storage: onboard storage for all included accessories (listing); the accessory list is not in the text read
Weight and warranty: not stated in the text read

Skip if you need a light, portable saw. The listing gives a 120V single-phase rating and states no weight in the text we read.

Hoteche 10-Inch Table Saw With Stand and Extendable Table

The Hoteche pairs a 15-amp motor with a 10-inch by 5/8-inch by 24-tooth blade, according to its listing. The listing states a 5000 RPM no-load speed and a cutting range of 0 to 45 degrees for angled cuts and bevels. The title adds a stand and an extendable table. The text we saved does not give a rip capacity or a depth of cut, and it stops partway through the feature list.

Power: electric (title); 15-amp motor (listing)
No-load speed: 5000 RPM (listing)
Blade: 10 inch x 5/8 inch x 24 tooth (listing)
Bevel range: 0 to 45 degrees (listing)
Stand and table: stand and extendable table (title)
Rip, depth, weight and warranty: not stated in the text read

Skip if you need a rip or depth figure before you buy, since the text we read does not state either.

Garvee 10-Inch Table Saw With Stand and Push Stick

The Garvee is a 10-inch saw with a 15-amp motor and a 5000 RPM cutting speed, according to its title and listing. The listing describes a rack and pinion bevel control for 90-degree cross cuts and 0-to-45-degree bevel cuts, a hand wheel that sets blade height, and a port at the back for connecting a dust collector. It says triangle supports at the back of the metal stand improve stability, and that extensions on both sides of the table support larger pieces.

Motor: 15 amp (listing)
Speed: 5000 RPM (title and listing)
Blade: 10 inch (title)
Cross cut: 90 degrees (listing)
Bevel range: 0 to 45 degrees (listing)
Blade height: set by a hand wheel (listing)
Dust: port for connecting a dust collector, at the back (listing)
Stand and push stick: included (title)
Power source, rip, weight and warranty: not stated in the text read

Skip if you need a stated rip capacity, since the text we read does not give one.

WORX BladeRunner Portable Tabletop Saw, 5.5 Amp (WX572L)

The WORX is a tabletop saw rated at 5.5 amps, and its title lists wood, metal, tile, aluminum and plastic as materials it cuts. It is the only saw in this set whose listing states a weight in the text we read, at less than 15 pounds. The listing also describes a steel rip fence and riving knife system, a miter gauge that makes cuts from 0 to 60 degrees on both sides, and a safety switch with a safety key. It says five blades are included, but the text we saved is cut off in the middle of that list.

Motor: 5.5 amp (title)
Weight: less than 15 pounds (listing)
Miter range: 0 to 60 degrees, both sides (listing)
Fence: steel rip fence and riving knife system (listing)
Safety: safety switch and safety key (listing)
Blades: five listed as included (listing; the list is cut off in our text)
Power source, blade size, rip, depth and warranty: not stated in the text read

Skip if you need a stated rip capacity or a stand. Neither appears in the text we read.

How we chose

We searched Amazon for “best table saw” on 2026-10-22 and read ten listings from the results. Each listing we read names a table saw in its title and gives a motor or amp rating in its text. We set aside mini saws sold for crafts and model making, miter saw combination units, blades and stands sold alone, and circular saws, because those are different products from the table saw this keyword describes. We chose from the listing text alone, not from price, popularity or sales labels.

The table and the product sections state only what each listing says in the text we read. Where a figure is missing, the cell says not stated; we did not fill a gap from another listing or from general knowledge.

Mistakes to avoid

Assuming the Bosch includes a battery. Its title says bare tool, and its listing says the core18v batteries are sold separately.
Assuming the SKIL TS6308-00 includes its stand. Its title says the stand is sold separately.
Expecting a rip figure for the Hoteche or the Garvee. The text we read gives neither.
Assuming every saw here handles a dado cut. Only the TS6307-00 states a dado figure in the text we read.

What we could not verify

Weight. Only the WORX listing states one in the text we read, at less than 15 pounds. For the other nine, the weight is unknown from our sources.
Warranty. None of the ten texts we read states a warranty term.
Rip figures for the Bosch, the Hoteche, the Garvee and the WORX. Depth-of-cut figures for every saw except the three SKIL models. The text we read does not give them.
Whether a stand is in the box for the DWE7485. The text we read does not say.
Full feature lists. Six saved copies stop partway through: the TS6338-00, TS6308-00, Bosch, Hoteche, Garvee and WORX. A spec we did not record may appear on the live page.

What the sources do not say

Which saw is more accurate or longer lasting. The listings do not compare them, and this post does not either.
How any of these saws cuts wood, metal or plywood in practice. The listings name materials and figures; they do not describe results.
Whether the Bosch’s rip or depth matches the corded saws, since the text we read gives neither figure for it.
Dado performance for saws other than the TS6307-00. The TS6338-00 listing names dado joints among its applications, and that is all it says.
How the 52-inch JET compares with the 30-inch rip version of the same model. The search results show a separate listing for that version, and we did not read it.

FAQ

Is the battery included with the Bosch table saw?

No. The title says Bare Tool, and the listing says the core18v high power batteries are sold separately. Buy the battery and charger as separate items, and check that you already own the core18v platform before you buy the saw.

Which table saw has a stand in the box?

The DEWALT DWE7485WS title names a stand, and so does the SKIL TS6338-00 title, which says folding stand. The SKIL TS6307-00 listing says its legs fold into a stand. The Garvee title lists a stand and push stick. The SKIL TS6308-00 title says its stand is sold separately, and the DWE7485 text we read does not say whether a stand is included.

What rip capacity should I look for if I cut 4×8 sheets?

The DEWALT DWE7485 and DWE7485WS listings both state 24.5 inches of rip capacity for ripping 4×8 plywood or OSB sheets. The SKIL TS6307-00 states 25.5 inches to the right of the blade and 14 inches to the left. The SKIL TS6338-00 and TS6308-00 state 24.5 inches to the right and 12 inches to the left. Compare these figures against the sheet work you do, and treat a missing figure as unknown rather than as a fail.

Can these saws cut dado grooves?

The SKIL TS6307-00 listing states a maximum dado width of 5/8 inch and says a dado insert needs an 8 inch dado blade set. The SKIL TS6338-00 listing names dado joints among the applications it covers. The other listings in this set do not state dado figures in the text we read.

Do these saws have a dust port?

Three listings name a dust feature. The SKIL TS6307-00 lists a dust port elbow that redirects dust to a container, the JET listing names an improved dust shroud around the blade, and the Garvee listing has a port at the back for connecting a dust collector. The other listings in the text we read do not name one.

Should I buy a corded or a battery table saw?

Four of the five listings that say corded state a rip figure, and all five give a motor rating in amps or horsepower.The Bosch states its speed and its battery requirement, but neither its rip capacity nor its depth of cut appears in the text we read, so the battery trade-off has to be checked on the listing. For a battery-powered yard tool, see our roundup of DeWalt 20V MAX brushless handheld blowers. For a corded 15-amp comparison, see our Snow Joe 22-inch 15-amp roundup.

Bottom line

Buy the saw whose listing puts a stand in the box and states a rip figure of at least 24.5 inches; if the listing states neither, do not assume either.

Sources

SKIL 15 Amp 10-Inch Jobsite Table Saw with Folding Stand-TS6307-00 (opened 2026-10-22) https://www.amazon.com/dp/B08F9RFJ2K
DEWALT 15 Amp 8-1/4 in. Compact Portable Jobsite Table Saw (DWE7485) (opened 2026-10-22) https://www.amazon.com/dp/B0842QDW95
DEWALT Portable Table Saw with Stand, 8-1/4 inch, up to 48-Degree Angle Cuts (DWE7485WS) (opened 2026-10-22) https://www.amazon.com/dp/B08ZH2HG6G
SKIL 15 Amp 8-1/4-Inch Compact Portable Jobsite Table Saw with Folding Stand-TS6338-00 (opened 2026-10-22) https://www.amazon.com/dp/B0H98G49V1
SKIL 15 Amp 8-1/4-Inch Compact Portable Jobsite Table Saw (Stand SFS0001 Sold Separately)-TS6308-00 (opened 2026-10-22) https://www.amazon.com/dp/B0DHS4RHR8
BOSCH GTS18V-08N PROFACTOR 18V 8-1/4 In. Portable Table Saw (Bare Tool) (opened 2026-10-22) https://www.amazon.com/dp/B0BF2Z4SDY
JET ProShop II 10-Inch Table Saw, 52-Inch Rip, Steel Wings, 1-3/4 HP, 120V 1Ph (JPS-10) (opened 2026-10-22) https://www.amazon.com/dp/B07BDSSCJV
Hoteche 10-Inch Table Saw – 15-Amp Electric Power Saw with Stand and Extendable Table for Woodworking, Carpentry, DIY Projects (opened 2026-10-22) https://www.amazon.com/dp/B0DJVP6MMC
Garvee Table Saw, 10 in 15A Multifunctional Saw with Stand and Push Stick, 90° Cross Cut and 0-45° Bevel Cut, 5000RPM, Adjustable Blade Height, Ideal for Woodworking (opened 2026-10-22) https://www.amazon.com/dp/B0CP5FJCJ5
WORX BladeRunner Portable Tabletop Saw, 5.5 Amp, WX572L (opened 2026-10-22) https://www.amazon.com/dp/B071P6GZN5