Pole Saw Parts Guide for Common Replacement Needs
As an Amazon Associate we earn from qualifying purchases.
Pole Saw Parts Guide for Common Replacement Needs
Most people searching for pole saw parts need one specific component: a chain, a guide bar, an oil cap, a gear head, a carburetor or a pole extension. Each of those parts fits a particular brand and model family, so the first step is to find the model number on your pole saw and match it to the listing. This guide covers eight replacement listings, grouped by the type of part, and notes the fit and content details that each listing states.
Quick answer
- Match the part to your exact model before you buy. Most listings name specific model numbers, and several say to check the owner’s manual or your model first.
- Chains and bars are sold by length and pitch. The JikRiseX listings give 3/8-inch low-profile pitch and 0.050-inch gauge.
- Oil caps, gear heads and carburetors are the parts most often sold as replacements. Confirm the part number printed on the old part.
- Aftermarket and non-original parts are sold alongside genuine parts. Read each listing to see which one you are buying.
How to identify the part you need
Start with the part number and model number on the pole saw itself. The Echo listing, for example, says to “consult owners manual for proper part number identification and proper installation” and to refer to its compatibility list. Write down the exact model before you search. A listing for a similar tool can look right and still fail to fit.
Take the old part out of the tool and read any numbers stamped on it. Some listings give the size of the part directly. The MHYYT cap listing, for example, says the cap is 7/8 inch inside diameter and replaces part 079084-01. Its listing also warns that if your cap is 11/16 inch in diameter, that size is no longer available. Measure the old part before you order a replacement.
Oil caps and gear heads
The oil cap and the gear head are two of the most common replacement parts in this group. They are often the first thing to wear or break on a pole saw. The two listings below show how these parts are sold.
The Echo 9001015 is a gear case and oiler assembly. Its listing says it includes one auto oiler assembly, is genuine Echo part, and is new and bulk packed. The listing names the Echo PPT-230, PPT-231, PPT-260 and PPT-261 pole saws among the models it fits.
The Yosoo listing is a chainsaw gearbox head sold as a pole saw attachment. Its title describes a 26 mm, 9-spline output and a gear head assembly. The listing says the gear uses a universal output seat and lists several machines, including GX35 and 139/140 models. It also describes the gear as having an aluminum shell and high-quality gears. The listing does not state a part number that matches a specific pole saw model, so confirm the spline count and diameter against the part you are replacing before buying.
Chains, guide bars and combos
Pole saw chains and bars come in several lengths. The three JikRiseX listings below are all sold as bar and chain combos for pole saws. Each one includes three chains and a bar.
The 8-inch JikRiseX combo lists 3/8-inch LP pitch, 0.050-inch gauge and 33 drive links, with a semi-chisel design. Its listing names Ryobi pole saw models P4360, P4361, P5453 and RY43161, along with several Greenworks and Chicago models. The listing gives OEM references for Ryobi and Greenworks parts, which you can compare against the number on your old bar.
The 10-inch JikRiseX combo lists the same 3/8-inch LP pitch and 0.050-inch gauge, but with 40 drive links. Its listing names Sun Joe, Greenworks, Remington and Echo models among the fits. A chain with more drive links fits a longer bar, so the drive link count is one of the first numbers to check.
The Houselife listing is a 2-pack of 8-inch replacement chains. It is sold for the Houselife HL-PS01CY and HL-PS01CY-M cordless pole saws. The listing describes the chain as heavy-duty and wear-resistant with hardened teeth. It names only those two Houselife models, so do not assume it fits other cordless pole saws.
Carburetors and fuel parts
The SIMPERAC listing is a carburetor for 25cc Craftsman two-cycle engines. The title names the WS210, WC210, WS2200, WC2200 and SE2200 weed trimmer models, and also lists the P210 and P2100 pole saws. The listing says the package includes one carburetor, one gasket, one primer bulb, two fuel filters, one carburetor adjustment tool, two fuel lines, two air filters and one spark plug. The listing lists many model codes, and several are given with part numbers. Compare the code printed on your engine before buying.
A carburetor is a precision part, and a mismatch can keep an engine from running. Confirm the model code against the engine on your pole saw before you order. If you are not sure, ask a qualified small-engine repair technician to check the fit.
Pole extensions and other housing parts
The yiqianba listing is a 3-foot pole extension for the Ryobi ONE+ 18V P4360 cordless pole saw. Its listing gives Ryobi part number 099988002034 and cross-references 310980002. The listing also says “Not recommended to use more than 2 extensions simultaneously.” That is a limit to plan around if you want a longer reach.
The Echo and Remington-style oil caps are not interchangeable with every pole saw housing. Check the part before you order, and use the listing’s model list as your guide.
Non-original and aftermarket parts
Not every listing in this guide is a genuine manufacturer part. The NaningLxh lock-off listing says directly: “This part is a non-original compatible spare part, and the manufacturer name and part number are for reference only.” It is sold for Black and Decker DCPS620B, DCPH820B and DCPH820M1 pole saws. The listing asks the buyer to confirm the model before ordering. Its title describes it as a replacement for a lock-off part.
The EGO Power+ listing is a genuine EGO part. It is a screw listed as fitting the PSA1000 pole saw. The listing is short, so check the part number on the old screw against the one in the listing before you buy.
Aftermarket parts can fit well and cost less than genuine parts, but the listing does not state how they will hold up over time. Read the compatibility notes and confirm the part number before you buy any aftermarket item.
Who each part suits
- Dull or worn cutting parts: a replacement chain and bar combo that matches your bar length and drive link count.
- Oil or gear problems: a genuine gear case or a gear head assembly that matches your model’s output shaft.
- Engine running problems: a carburetor kit only after you confirm the model code on the engine.
- Need more reach: a pole extension that matches your pole saw model, with the listing’s two-extension limit in mind.
Mistakes to avoid when ordering pole saw parts
The most common mistake is buying by the name of the tool instead of its model number. Many of the listings in this guide name several models, but only some of those models match your saw. Check the exact model before you click buy.
The second mistake is ignoring the part number on the old part. The MHYYT listing shows how a small measurement, such as the cap’s inside diameter, decides whether a part fits.
The third mistake is assuming all bars and chains are interchangeable. The two JikRiseX bar listings differ in drive link count and fit different machines. Count the drive links on your old chain or measure the bar before you buy.
The fourth mistake is skipping the owner’s manual. Several listings tell you to consult the manual for correct part numbers and installation. Follow those instructions, and do not install a part if you are unsure of the fit.
How to use this guide when you order
Work from the model number down, not from the listing up. Identify the exact pole saw, find the failing part and its number, and then search for that number. Use the model lists in each listing to confirm the fit. If a listing does not name your model, skip it and look for one that does. For background on safe use before and after a repair, see our guide on how to use a pole saw safely.
Reading the fit notes in a listing
Fit notes in these listings take three forms. Some give a list of models, some give OEM or replacement part numbers, and some give physical measurements. The 8-inch JikRiseX combo gives all three: a list of Ryobi, Greenworks, DeWalt, Craftsman and Kobalt models, OEM references 316670001 and 099988002009 for Ryobi pole saws, and a 3/8-inch LP pitch with 0.050-inch gauge. The 10-inch JikRiseX listing names a different set of models and an OEM list that includes Makita and Remington. When two listings name the same brand, compare the models and part numbers, not only the maker.
Measurements matter most for parts that connect to a moving system. The MHYYT cap listing gives its inside diameter and the part number it replaces. The GJK pruning saw blade listing gives a 15-inch length and says it is made from high-speed steel. The ZhaoZo spring listing names the Corona TP 3811, TP 3841 and TP 3714 pruners it fits. Listings do not state every measurement, so confirm what a listing leaves out against the part you are replacing.
FAQ
How do I know which chain length to buy?
Measure the bar or read the length marked on it, and check the drive link count on the old chain. The JikRiseX 8-inch combo lists 33 drive links and the 10-inch combo lists 40. Those numbers are different, so the two chains are not interchangeable.
Are the Echo gear case and the Yosoo gearbox head the same part?
No. The Echo 9001015 is a genuine Echo gear case and oiler assembly for the PPT series. The Yosoo listing is a universal chainsaw gearbox head with a 26 mm, 9-spline output. The two listings describe different parts with different fit notes.
Which part fits the Ryobi P4360?
The JikRiseX 8-inch combo lists the Ryobi P4360 among its pole saw models, and the yiqianba listing is a pole extension for the P4360. Confirm the model number on your saw before ordering either.
Is the Houselife chain compatible with other cordless pole saws?
The listing names only the HL-PS01CY and HL-PS01CY-M models. It does not state compatibility with other cordless pole saws, so do not assume it fits.
What does non-original mean on a listing?
The NaningLxh listing says its lock-off is a non-original compatible spare part, and the manufacturer name and part number are for reference only. That means it is not a genuine manufacturer part.
What if my cap is 11/16 inch?
The MHYYT listing says a cap of that size is no longer available. Measure the old cap before ordering so you do not buy the wrong size.
Bottom line
Pole saw parts fit by model, so start with the model number on your saw and the part number on the old part. Compare chain and bar lengths by drive link count, confirm carburetor codes against the engine, and read any non-original notice before buying. When a listing does not name your model, pick a different listing rather than guessing.
Related reading: Seesii vs AVADA Pole Saws: Reach, Weight and Parts and How to Use a Pole Saw Safely.
Products in this roundup
1. Genuine Echo 9001015 Gear Case/Oiler Assembly
A genuine Echo gear case and oiler assembly listed as fitting the PPT-230, PPT-231, PPT-260 and PPT-261 pole saws. The listing says it includes one auto oiler assembly.
2. Chainsaw Gearbox Head, 26mm 9 Spline Pole Saw Attachment
A universal-output gear head with a 26 mm, 9-spline shaft and an aluminum shell. The listing names GX35 and 139/140 machines among its uses.
3. 107512-01 Cap/Bulb Assembly for Remington Electric Chainsaw and Pole Saws, 4 Pack
A 4-pack of oil tank cap and bulb assemblies listed as replacing part 079084-01. The listing gives an inside diameter of 7/8 inch and lists several Remington and MTD pole saw models.
4. SIMPERAC Carburetor for Craftsman 25CC Weed Eater and Pole Saw
A 25cc carburetor kit that includes a gasket, primer bulb, fuel filters, fuel lines, air filters and a spark plug. The listing names the Craftsman P210 and P2100 pole saws among the models it fits.
5. JikRiseX 8 Inch Chainsaw Guide Bar and Chain Combo for Pole Saws
A combo with three 8-inch chains and one guide bar, with 3/8-inch LP pitch, 0.050-inch gauge and 33 drive links. The listing names Ryobi P4360 and P4361 among its pole saw models.
6. JikRiseX 10 Inch Pole Saw Bar and Chain Combo
A combo with three 8-inch chains and one guide bar listed with 40 drive links and 3/8-inch LP pitch. The listing names Sun Joe, Greenworks, Remington and Echo models among its fits.
7. Houselife 2-Pack 8 Inch Replacement Chain for Cordless Pole Saw
A 2-pack of 8-inch replacement chains listed for the Houselife HL-PS01CY and HL-PS01CY-M cordless pole saws.
8. yiqianba 3-Foot Pole Extension for Ryobi ONE+ 18V P4360
A 3-foot pole extension listed with Ryobi part number 099988002034 for the P4360 cordless pole saw. The listing advises against using more than two extensions at once.
