Best Cordless Pole Saws: Reach, Battery Fit and Chain Specs

# Best Cordless Pole Saws: Reach, Battery Fit and Chain Specs

Every product detail in this guide comes from the supplied product data for each item. Manufacturer claims are marked as claims. One entry in the set is a battery charger for a mini chainsaw, not a saw. It is covered at the end of the product section so it is not mistaken for a saw.

Before you compare reach and chain speed, check which battery already sits on your shelf. Most of the saws in this set are sold as bare tools, which means the battery and charger are not in the box. A saw that fits the battery you own can save you a second purchase, and a saw that uses a different platform means a new battery line.

Start here: who these saws suit, and who should skip them

These saws suit a homeowner who trims branches up to the reach of an extension pole, and who wants to avoid a ladder for overhead cuts. They also suit someone who already owns a 20-volt or 21-volt battery platform, and wants to add a saw to it, or someone who wants a compact two-in-one unit that works as a mini chainsaw for low branches and as a pole saw for high ones.

They are a poor fit if you need a saw for large trunks or felling. The bars in this set are 6, 8 and 10 inches, and the data gives no cutting-capacity figure for diameter beyond the 5-inch thickness that one maker mentions. They also suit you less well if you need a saw with included batteries and a charger ready to use out of the box, because four of the seven saw listings are tool only.

Reach math: pole length, your height and overhead cutting

Pole saw reach depends on three things: the length of the pole, your height, and the angle of the cut. Makers state reach in different ways, so compare the numbers carefully.

Some listings give a maximum extension and a total reach that includes the user’s height. The Paxwrenx saw gives 7.5 feet for a two-section pole and 10 feet for a three-section pole, and a total reach of 12.5 feet and 15 feet, with the user’s height included. The AVADA DeWalt saw gives a telescoping pole from 5.6 to 9.9 feet, with a total reach of up to 15.9 feet based on a 6-foot person extending the saw straight at shoulder height. The Autubin saw uses a similar basis: a pole from 4 to 9 feet, and a maximum reach of 16 feet based on a 6-foot user.

Other listings give a total reach without stating the user’s height. The EGO shaft extends to a total reach of up to 13 feet, or up to 17 feet with an extension pole sold separately. The SIEARPUORL pole is listed at 4.4 feet, without a total reach figure.

The practical point is that the stated figures for the saws with a user-height basis run from about 12.5 to 16 feet. The exact reach depends on the pole length, the cut angle and your height. Plan the cut before you buy: stand where you will work, lift the saw to the branch, and compare the height you need with the figure on the page.

How to choose: five checks that matter more than the brand

1. Battery platform. This is the most important check. The Paxwrenx saw and the HEINPRO saw are built for DeWalt 20-volt MAX batteries. The AVADA DeWalt saw lists a long range of DeWalt 20-volt batteries. The AVADA Milwaukee saw is listed for Milwaukee M18 batteries. The EGO saw uses its own 56-volt battery, which ships with the kit. Two listings use 21-volt packs: the Autubin highlights name two 21-volt 4.0 amp-hour packs, and SIEARPUORL includes two 21-volt packs. The data does not name a battery brand for those two, so check their charger and pack before you buy.

2. Bar and chain size. Most saws in this set use an 8-inch bar. The SIEARPUORL saw uses a 6-inch bar, and the EGO uses a 10-inch bar. A longer bar cuts thicker wood, but it is heavier and takes more power. The 8-inch bars in this set are the middle ground.

3. Chain speed and cut count. Makers state chain speed in different units, and the cut count depends on the battery and the test material. The Paxwrenx saw lists 18 feet per second and up to 90 cuts on 4-by-4 pressure-treated wood with a 4.0 amp-hour battery. The EGO lists up to 100 cuts per charge with its 2.5 amp-hour battery and a chain speed of up to 20 meters per second. The two cut-count figures use different batteries and different tests, so they are not directly comparable.

4. Lubrication. An automatic oiler keeps the chain running without stopping to oil it by hand. Paxwrenx, HEINPRO and both AVADA models describe an automatic oiling system. The Paxwrenx oil is not included, and the AVADA page says to add oil. The Autubin and EGO pages do not describe an oiler in the data, so check the manual for either saw before you run it.

5. What comes in the box. Some listings include a shoulder strap, goggles, gloves, a brush, a screwdriver and extra chain. Others include only the saw. The included parts field tells you what to expect, and the bare-tool listings tell you that a battery and charger are needed.

Measure before you buy

Measure three things before choosing a model.

• Your highest cut: stand where the cut will be and measure from the ground to the branch. Compare that figure with the total reach on the page, and remember that the reach figures assume the saw is held straight at shoulder height.
• Your battery: check the battery already in your garage. Confirm the platform name, the voltage and the pack type against the compatibility list.
• Your bar length: the cut you need should fit the bar. An 8-inch bar is the common size in this set. The 6-inch SIEARPUORL bar is shorter, and the 10-inch EGO bar is longer.

Comparison table

Product	ASIN	Type	Battery	Bar	Stated reach	Included
Paxwrenx 8-inch, DeWalt 20V	B0H3GST2VM	Pole saw, bare tool	DeWalt 20V, not included	8 in	12.5 ft (2-section), 15 ft (3-section), with user height	Saw only
HEINPRO 8-inch, DeWalt 20V	B0FHWGB2XG	Pole saw, bare tool	DeWalt 20V, not included	8 in	Extension stated two ways, see entry	Saw, bar, chain, pole, strap
NSGWKZD mini chainsaw charger	B0FKN7SBPV	Charger, not a saw	21V charger	None	Not applicable	Charger only
AVADA 8-inch, DeWalt 20V	B0FDB34119	Two-in-one saw, bare tool	DeWalt 20V, not included	8 in and 6 in	15.9 ft with user at shoulder height	Mini chainsaw, pole, chains, strap, gloves, goggles, oil bottle, brush, screwdriver, manual
Autubin 8-inch two-in-one	B0FCBHMYGT	Two-in-one saw	Two 21V 4.0 Ah packs (listed in highlights)	8 in	16 ft with 6 ft user	Pole (battery status in entry)
AVADA 8-inch, Milwaukee M18	B0G1H4WXS5	Two-in-one saw, bare tool	Milwaukee M18, not included	8 in and 6 in	15.9 ft with user at shoulder height	Mini chainsaw, pole, strap, gloves, glasses, oil bottle, brush, screwdriver, manual
EGO Power+ pole saw kit	B0BRXJKRLP	Pole saw with battery and charger	EGO 56V 2.5 Ah, included	10 in	Up to 13 ft; 17 ft with EP1000 pole sold separately	Saw, 56V battery, 56V charger
SIEARPUORL 6-inch two-in-one	B0H259MQ9H	Two-in-one saw with two batteries	Two 21V packs and a charger, included	6 in	Pole 4.4 ft, total reach not stated	Mini chainsaw, pole, two batteries, charger, two chains, goggles, gloves, manual

The eight listings, one by one

1. 8-inch Cordless Pole Saw for DeWalt 20V Max Battery, Bare Tool

This is a bare-tool pole saw from Paxwrenx, built for DeWalt 20-volt batteries. The listed compatible packs are DCB200, DCB201, DCB203, DCB204, DCB230 and DCB240, and the bullets add DCB205. The battery and charger are not included. The saw has an 8-inch chain bar, with a maximum chain speed of 18 feet per second, and it uses a high-efficiency motor. The chain is 3/8 inch low-profile pitch, 0.043 inch gauge, with 33 drive links and 62 teeth.

The pole comes in two or three sections. The maker gives a maximum extension of 7.5 feet with two sections and 10 feet with three, and a total reach with the user’s height of 12.5 feet and 15 feet. The cutting angle is 90 degrees and the blade is straight. The chain tensions without tools, and the oiler is automatic, but oil is not included. The product dimensions are 8.5 by 4.1 by 114 inches, and the handle is thermoplastic elastomer.

The maker’s claims include up to 90 cuts per charge on 4-by-4 pressure-treated wood with a 4.0 amp-hour battery, low kickback, and an extended warranty described as a 90-day return, a one-year replacement and a three-year limited warranty.

Best for: a DeWalt 20-volt owner who wants a pole saw with a long pole, and who already has a battery.

Skip if: you need a battery and charger in the box, or you do not own a compatible DeWalt pack.

2. HEINPRO Cordless Pole Saw Compatible with DeWalt 20V MAX Battery

This is an 8-inch pole saw sold with a fixed-length extension pole, a shoulder strap, an 8-inch guide bar and an 8-inch saw chain. The battery and charger are not included. The compatibility statement covers DeWalt 20-volt MAX lithium-ion batteries. The listing gives a voltage of 20 volts of direct current, a weight of 6.7 pounds and a product size of 3.5 by 4.7 by 98.4 inches. The warranty is a limited warranty.

The bullets describe a metallurgical enhancement, a safety lock trigger that works for left- and right-handed users, a low-vibration build and automatic oiling that lubricates the chain and guide bar. These are the maker’s claims. The chain specification bullet gives 3/8 inch pitch, 0.050 inch gauge, 33 drive links and an 8-inch bar.

Not confirmed: the reach figure conflicts with the pole type. The highlights say the extension reaches up to 14.2 feet, but the included parts field lists a fixed-length extension pole, and the product dimensions give a length of about 8.2 feet. Also, the teeth field reads 7 and the blade shape reads triangular, which do not describe a standard 8-inch chain. Check the reach and chain on delivery before you rely on either figure.

Best for: a DeWalt owner who wants a basic 8-inch pole saw with a shoulder strap, and who can confirm the pole length.

Skip if: you need a confirmed reach, or you want a telescoping pole.

3. Mini Chainsaw 21V Lithium Battery Charger, fit for Garden Joy Drill, Impack Wrench, Pole Saw Tool Power Cord Adapter Cable 6 ft

This is a charger, not a saw. Read this entry before you buy anything in this guide. The item is a 21-volt lithium battery charger with a DC round barrel connector, a 6-foot cord and a US two-pin plug. The output is 21 volts at 1 amp, or 21 watts. The compatible devices field lists mini chainsaws, and the bullets name a long list of mini chainsaw brands, including Aker, Saker, Seyvum, O-CONN, Dinishare and Vtek.

The title also says it fits a drill, an impact wrench and a pole saw. The data gives no compatible-device entry for a drill or an impact wrench, and the compatibility text names mini chainsaws only. Not confirmed: the title’s list of tools is not supported by the device field, so do not buy this for a drill or a saw without checking the output voltage and connector first.

The input voltage field reads 240 volts, while a bullet gives an input of 100 to 240 volts at 50 or 60 hertz. Not confirmed: the two input figures do not agree. The chip is described as having protection against over-power, over-current, over-voltage, over-temperature and short circuit. The warranty is one year.

Best for: an owner of a compatible mini chainsaw who needs a spare charger, after checking the connector and voltage.

Skip if: you want a pole saw. This is not one.

4. 2-in-1 Cordless 8-Inch Pole Saw and Chainsaw for DeWALT 20V MAX Battery, Tool Only

This is a two-in-one unit. It works as a mini chainsaw with an 8-inch and a 6-inch bar, and it becomes a pole saw when the telescoping extension pole is attached. The product is tool only, with no battery or charger. The maker states compatibility with DeWalt 20-volt MAX batteries, including DCB200, DCB201, DCB203, DCB204, DCB205, DCB206, DCB230, DCB240, DCB246 and DCB248. The motor is brushless, and the stated wattage is 1200 watts.

The pole adjusts from about 5.6 to 9.9 feet. The maker says the total reach is up to 15.9 feet, based on a 6-foot person extending the saw straight at shoulder height. The cutting head rotates from 0 to 180 degrees, which the maker says helps with cuts along fences and in corners. The auto-lube system keeps the chain running, and the bullets give a chain speed of up to 38 feet per second. The saw has tool-free installation and an automatic chain tensioner.

The kit includes the mini chainsaw, the extension pole, an 8-inch and a 6-inch chain, a chain plate, a shoulder strap, anti-slip gloves, goggles, a bottle for oil (no oil included), a brush, a two-in-one screwdriver, a manual and the maker’s support.

Not confirmed: the battery-count field reads “Nonstandard Battery batteries required”, which does not say what battery is needed. The battery-included status is clear: none is included, so use the DeWalt pack you own.

Best for: a DeWalt 20-volt owner who wants a versatile two-in-one, with a pole and a mini chainsaw in one kit.

Skip if: you want a pole saw with a battery in the box.

5. Brushless 2-in-1 Cordless Pole Saw and Mini Chainsaw, 8 Inch Max Reach 16 Ft

This is a two-in-one unit from Autubin. The highlights say it comes with two 21-volt 4.0 amp-hour batteries. The included-components field says only “pole”, so the battery status is not confirmed until you check the box. The listing gives a chain of 8 inches, 1/4-inch pitch, 0.043-inch gauge and 46 links, and a chain speed of 26.2 feet per second.

The maker describes a 1200-watt pure copper brushless motor and a high-speed steel chain. It gives a telescopic pole from 4 to 9 feet, a maximum reach of 16 feet based on a 6-foot user, and an angle adjustment from 0 to 180 degrees. The bullets say two batteries give up to 120 minutes of alternating use, with an LED that shows the remaining charge. The maker also describes the 8-inch bar as doubling a 4-inch saw and surpassing a 6-inch saw by 33 percent. These are the maker’s claims.

Not confirmed: the horsepower field reads 1200 watts. Horsepower and watts are different units, so do not compare this figure with a horsepower figure from another maker.

The product weighs 6.9 pounds and measures 49.8 by 8 by 5.3 inches. The battery platform is described as 21-volt, but the listing does not name a brand. Check the pack type before you buy a charger.

Best for: a buyer who wants two packs included and a mini chainsaw that converts to a pole saw.

Skip if: you need a confirmed battery and charger in the box, since the included-components field does not confirm them.

6. 2-in-1 Cordless 8-Inch Pole Saw and Chainsaw for Milwaukee M18 Battery, Tool Only

This is the Milwaukee M18 version of the AVADA two-in-one. It is tool only, with no battery or charger. The maker states it works with Milwaukee M18 packs, including the 48-11-1820, 48-11-1850, 48-11-1852, 48-11-1860 and 48-11-1862 models and others. The voltage field reads 18 volts, the motor is rated at 1200 watts, and the reach is the same 15.9 feet with a user at shoulder height.

The kit includes the 8-inch and 6-inch mini chainsaw, a multi-angle telescopic pole, an oil bottle (no oil), a cleaning brush, a screwdriver, a manual, a shoulder strap, an anti-slip glove and glasses. The features match the DeWalt version: a 0 to 180 degree head, auto-lube, tool-free installation and automatic chain tension. The item weight is not stated in the listing, and the warranty is not stated in the data.

Best for: a Milwaukee M18 owner who wants the same two-in-one design.

Skip if: you use DeWalt 20-volt batteries, since this version is built for M18.

7. EGO Power+ Pole Saw for Tree Trimming, Cordless Electric Pole Saw with Telescopic LED Cut Line Indicator

This is the only kit in the set that includes both a battery and a charger. The included components are a 10-inch pole saw with a telescopic carbon fiber shaft (model PS1000), a 56-volt 2.5 amp-hour battery (BA1400T) and a 56-volt 210-watt charger (CH2100). The item weighs 9.4 pounds and measures 91.73 by 8.23 by 6.89 inches.

Not confirmed: the title gives the model as PS1001, while the included components name the saw as PS1000. Check the model number on the box before you register the product or buy a replacement part.

The maker describes an LED cut line indicator, which it says is the first among pole saws for tree trimming to feature one. The bar is 10 inches, with a quarter-inch pitch and 0.043-inch gauge chain, and the maker gives a chain speed of up to 20 meters per second. The page does not compare that figure with the feet-per-second numbers used by other makers, so this guide reports it as stated. The maker also says the saw delivers up to 100 cuts per charge with the included 2.5 amp-hour battery.

The telescopic shaft gives a total reach of up to 13 feet. An EP1000 extension pole, sold separately, takes that to 17 feet. The shaft is covered by a limited lifetime warranty, according to the page. The saw has tool-free chain tensioning and a quick-adjust handle with a shoulder strap hook. The battery works with all EGO 56-volt ARC lithium batteries.

Best for: a buyer who wants a kit with battery and charger, and who already owns EGO 56-volt equipment or plans to.

Skip if: you need a lighter saw, or a bar shorter than 10 inches.

8. 2-in-1 Cordless Pole Saw and Mini Chainsaw, 6-Inch Battery Powered Tree Trimmer with 4.4ft Extension Pole

This is a two-in-one unit with a 6-inch guide chain, a detachable 4.4-foot extension pole, two 21-volt lithium batteries and a charger. The package includes the mini chainsaw, the pole, two batteries, the charger, two chains, goggles, gloves and a manual. The maker describes it as a pruner for high branches and low yard work, and says it cuts wood and branches up to 5 inches thick. These are the maker’s claims.

The brand field reads SIEARPUORL, and the manufacturer field reads SS. Not confirmed: the two names do not match, so check the box for the maker before you contact support. The horsepower field reads 1 hp, and the included-components field reads “attachments”, which is less specific than the bullets. The item size is 9 by 5 by 23 inches. The item weight and warranty are not stated in the listing.

Best for: a light pruner for a homeowner who needs a short pole and a 6-inch bar, with batteries and a charger in the box.

Skip if: you need a longer pole or a longer bar, or you need a confirmed warranty.

Chain and bar specs compared

The bar length decides the thickest wood a saw can handle comfortably. Most of the saws here use an 8-inch bar, which is the middle size in the set. The SIEARPUORL saw uses a 6-inch bar, so it is best for smaller limbs, while the EGO uses a 10-inch bar, so it has more cutting length.

The chain pitch and gauge should match the bar. The Paxwrenx chain is 3/8 inch low-profile pitch, 0.043 inch gauge, with 33 drive links. The HEINPRO bullets give 3/8 inch pitch, 0.050 inch gauge, 33 drive links. The Autubin chain is 1/4 inch pitch, 0.043 inch gauge, with 46 links, and the EGO chain is 1/4 inch pitch and 0.043 inch gauge. Those are different chain families, so a replacement chain must match the saw’s own specification, not another brand’s.

Chain speed is one more way to compare the saws, but the numbers come from different makers and different tests. The Paxwrenx saw gives 18 feet per second, the Autubin 26.2 feet per second, and the AVADA DeWalt saw up to 38 feet per second in its bullets. The EGO gives up to 20 meters per second. Read those figures as the maker’s statements, not as a common benchmark.

Lubrication also varies. The Paxwrenx and HEINPRO saws describe automatic oilers, and the AVADA pages say the chain is lubricated while it runs, but you must add oil to the bottle. Keep the oil level up on every model that uses it, and check the page for the oil type.

Safety and handling

Pole saws put the cutting head above your head, so the safety basics matter more than usual. The features in this set that the makers describe as safety features include a dual-side safety lock trigger on the HEINPRO saw, a low kickback chain on the Paxwrenx saw, and a safety lock on the AVADA DeWalt saw. The kits with goggles and gloves include them in the box, and you should wear them on every cut.

Keep clear of power lines. Keep the cutting head below the power line when you work near it, and never cut a branch that touches a line. Stand clear of a branch as it falls. Hold the saw with both hands, and keep your feet on solid ground. Do not use a pole saw from a ladder unless the manual for your model allows it.

Check the pole lock before each use. A pole that slips at the joint can change the cut angle and the reach. Retighten the locks and inspect the joints each time you extend the pole.

Maintenance

Clean the bar and chain after each use. Remove sap and sawdust from the chain and the bar groove. Check the chain tension according to the manual, because a loose chain can jump off the bar and a tight chain can wear the bar and motor. Several of these saws use tool-free tensioning, which makes the adjustment easy to check.

Keep the oil bottle full on the models that need it. The Paxwrenx oil is not included, and the AVADA kits include a bottle that is for oil, not a supply of oil. Use the oil type the manual names.

Keep batteries and chargers dry and at room temperature, and do not charge a battery that is hot. The EGO battery is a 56-volt pack with a 2.5 amp-hour capacity, and the AVADA and Paxwrenx saws use DeWalt or Milwaukee packs, so store each pack with its own platform.

Inspect the chain for wear, cracks and loose drive links. Replace a damaged chain before use, and use the chain that matches the bar length and pitch.

Before you buy: a checklist

1. Check the battery you already own. Confirm the platform name, voltage and pack type.
2. Measure your highest cut and compare it with the stated reach, including the user’s height.
3. Choose the bar length that matches the wood you cut. The 8-inch bars cover most of the set.
4. Check whether the battery and charger are included. Four saw listings are tool only.
5. Read the included-parts list for the strap, gloves, goggles and oil bottle.
6. Check the warranty on the page. Some listings state one, others do not.
7. Check the model number on the box against the page, and note any figure marked as not confirmed.

Frequently asked questions

Which saw works with a DeWalt 20-volt battery? The Paxwrenx saw, the HEINPRO saw and the AVADA DeWalt two-in-one all list DeWalt 20-volt compatibility. None includes the battery or charger.

Which saw includes a battery and charger? The EGO kit includes a 56-volt battery and charger. The SIEARPUORL kit includes two 21-volt batteries and a charger. The Autubin listing highlights two 21-volt packs, but its included-components field is not confirmed.

What is the longest reach in the set? The EGO kit’s shaft reaches up to 13 feet, and the maker says 17 feet is possible with an EP1000 extension pole, which is sold separately. Among the saws without a separate pole, the AVADA and Autubin models state 15.9 to 16 feet based on a user at shoulder height, so the basis differs from the EGO figure.

Is the mini chainsaw charger a saw? No. It is a charger for mini chainsaws, and the title names tools that the device field does not confirm.

Why do the chain speeds not compare directly? Each maker states its own figure, and some use different units. The EGO figure is in meters per second. The guide reports each figure as stated.

Can I use a longer pole on a shorter saw? Only if the maker sells one that fits. The data names an EP1000 extension pole for the EGO kit and no other separate pole. For the other saws, check the page before you assume an extension is available.

What does “Not confirmed” mean in this guide? It marks a figure or label that conflicts with another figure on the same page. The reason is given once, in the product entry, so you know what to check when the saw arrives.

Links on this page are affiliate links, which means a purchase through them can support the site at no extra cost to you.