Snow Joe SJ627E Scraper Bar: Check the Fit First
As an Amazon Associate we earn from qualifying purchases. Details
If you are looking for a snow joe sj627e scraper bar, check the model number before anything else. A scraper bar is a replacement part, and it has to match the machine it goes on. This guide explains what the SJ627E listing states, why a scraper bar listed for another model may not fit, and how to check the fit before you order. None of the scraper bars in this group is listed for the SJ627E, so this article does not recommend one. It tells you what to confirm first. Read the listing and the manual together, and compare every measurement before you buy.
Quick answer
No scraper bar in this group is listed for the SJ627E. The one Snow Joe scraper blade is listed for the SJ619E, and its listing does not say it fits the SJ627E. The other scraper bars name different brands’ machines. Look up the model number on the machine or in its manual, and compare the replacement’s dimensions and hole pattern with the part you remove. If you cannot confirm a match, do not buy.
What the SJ627E listing states
The SJ627E is listed as a corded electric snow blower with a 22-inch clearing width and a 13-inch ideal snow depth. The specs give a maximum throw distance of 25 feet and an item weight of 34.8 pounds. The bullets say a 15-amp electric motor clears a 22-inch by 13-inch path in a single pass, and that the all-steel auger cuts 22 inches wide by 13 inches deep with each pass. The listing also includes two LED lights, a 2-year manufacturer limited warranty and an ETL specification mark.
The listing’s extension cord advice is short. It says to use a certain gauge and length of extension cord, and it says not to use an extension cord over 100 feet (30 meters). It does not state the gauge, so check the manual for the gauge you need before you run the machine on an extension cord.
The listing does not name a scraper bar for the SJ627E. A scraper bar is a separate part, and the machine listing is not a parts listing.
Why the model number decides the fit
A snow blower or snow thrower removes snow with an auger or impeller rather than blowing it, and the term “snow blower” is a misnomer, according to the Wikipedia entry on snow blowers. The machine’s scraper bar works with that auger and housing. A part built for a different housing may not line up with the mounting holes, even when the two machines look alike.
For that reason, a scraper bar listed for a different model is not a match, even when the brand is the same. The Snow Joe scraper blade in this group is listed for the SJ619E. Its title and item type both name the SJ619E, so treat it as a part for that model. The listing does not say it fits the SJ627E, so do not assume it does.
What to compare before you buy
Model number
Find the model number on the machine, usually on a label near the engine or the housing, or in the manual. Compare it with the model in the replacement listing. If the listing names one model and the machine says another, the part is not a match.
Length and thickness
The Gpartsden listing gives a 26-inch length, a 2-1/4-inch width and a 1/8-inch thickness for its part, and it asks you to compare those dimensions with your original plate before installation. Measure the old scraper bar before you order, and compare length, width and thickness.
Hole pattern and hardware
The Gpartsden listing gives four mounting holes with a 0.35-inch inside diameter, and it says hardware is sold separately. The Czarixa listing says no installation hardware is included and that you should reuse your existing fasteners or buy the right hardware. Count the holes on your old bar, measure their spacing, and make sure the new bar’s holes line up.
Material and coating
The listings describe steel with a black powder coat, and the Gpartsden listing describes a rust-proof finish. A rust-resistant coating helps, but the listing does not give a test result for it. Check the coating against your own use, and do not treat a claim on the page as a guarantee.
How to measure your old scraper bar
Take the old bar off the machine before you order, and lay it flat on a bench. Measure its length from end to end, its width across the flat face, and its thickness at the edge. Note whether the bar is straight or curved, and whether it has any bends at the ends. Count the mounting holes, then measure the distance between the centers of the holes. Write all of those numbers down, and bring them to the listing.
Take photographs of the old bar from the front and the back, with a tape measure in the frame. The photographs help the seller see the hole layout if you need to ask a question. Keep the old fasteners in a bag with the bar, so you can check their size against the new bar’s holes. A listing that gives a hole diameter, such as the 0.35-inch inside diameter in one listing, can be compared directly with the fasteners you already have.
If the new listing gives a length that differs from your old bar, do not assume the difference is small. A bar that is a little too long or too short can leave the ends unsupported, and a bar with the wrong hole spacing will not seat correctly. Compare each number, and only order when every number matches the machine.
What each scraper bar listing states
Each listing below covers one scraper bar in this group. None of them names the SJ627E, so none is a match for this machine on the listing alone.
At a glance: the 4 scraper bars, by their own listing fields
| Listing | Fits | Dimensions | Flag |
|---|---|---|---|
| 24-inch bar, Husqvarna | Model 531064001 — check against your machine | 60.96 cm clearing width; 2-bar package | No installation hardware included; skip unless your machine model is listed as compatible |
| Bar for a Honda machine | Honda part number 780-684 | 1 x 0.98 x 0.5 in; 9.6 oz | Brand field is empty — manufacturer model number is the only brand reference; confirm against your manual |
| 26-inch bar, MTD/Cub Cadet/Craftsman/Yard Machines (1992+) | Four listed brand families | 26 in long, 2-1/4 in wide, 1/8 in thick; 4 mounting holes, 0.35 in inside diameter | Hardware sold separately; compare hole spacing with your original plate |
| Snow Joe scraper blade | SJ619E (not the SJ627E) | 16 oz; 12 x 4 x 3 in package | Does not name the SJ627E — do not buy for that machine unless the seller confirms the fit in writing |
None of these four listings names the SJ627E, so none is a confirmed match for that machine on the listing alone. Measure your old scraper bar’s length, width, thickness, and hole spacing before ordering any replacement.
24-inch scraper bar listed for Husqvarna snow blowers on Amazon (affiliate link)
Scraper bar listed for a Honda machine on Amazon (affiliate link)
26-inch scraper bar listed for MTD and Cub Cadet machines on Amazon (affiliate link)
The first scraper bar is listed for Husqvarna snow blowers and gives a clearing width of 60.96 centimeters in its specs. The listing says it is made of premium-grade steel with a rust-resistant black powder coating, and it describes a scratch-free glide over concrete, asphalt and pavers. It states that the package includes two bars and that no installation hardware is included. Its model number, 531064001, is the reference to check against the machine. Skip it unless your machine’s model matches a listed compatible model.
The second scraper bar is listed for a Honda machine. Its listing gives a product size of 1 by 0.98 by 0.5 inches, a weight of 9.6 ounces, and the manufacturer’s model number, 780-684. The bullets describe it as a replacement for a specific Honda part number and say it attaches without special tools. The brand field is empty, so the manufacturer name in the specs is the only brand reference. Skip it unless you confirm the Honda part number against your machine’s manual.
The third scraper bar is listed for MTD, Cub Cadet, Craftsman and Yard Machines two-stage snow blowers from 1992 onward. The listing gives a length of 26 inches, a width of 2-1/4 inches and a thickness of 1/8 inch, with four mounting holes of 0.35 inches inside diameter. It also says hardware is sold separately, and it asks you to compare the dimensions and hole pattern with your original plate. Skip it if your machine is not one of the listed brands, or if your original plate does not match these measurements.
The Snow Joe scraper blade is listed for the SJ619E. Its listing gives an item weight of 16 ounces and a package size of 12 by 4 by 3 inches, and it says it fits SJ619E snow blowers. The listing does not name the SJ627E, so do not buy it for that machine unless the seller confirms the fit in writing.
How to choose
- Choose a scraper bar only after the listing names your exact model. A listing for a different model number is not a match.
- Choose a part whose dimensions and hole pattern match the bar you remove, and measure before you order.
- Plan to reuse your fasteners or buy hardware separately if the listing says hardware is not included.
- Skip any listing that names a different brand’s machine, even if it looks similar.
- If you need a different snow-clearing machine rather than a part, the electric snow blower for a small driveway guide covers that choice.
- If your driveway is gravel and a scraper bar is not the part you need, the electric snow shovel guide for a gravel driveway covers that option.
- For a cordless alternative, the cordless snow blower and shovel guide compares battery-powered choices.
Here is one worked example, built on a scenario we define.
Step 1: 44 inches divided by 22 inches equals 2 passes. Step 2: Check the multiplication: 22 inches times 2 passes equals 44 inches, so two passes cover the width exactly.
The result is two passes for a 44-inch driveway. Real passes overlap a little, so plan for a little more than two. The example shows the machine’s clearing width at work, but it does not tell you whether a scraper bar fits, so the model number still decides that.
Common mistakes to avoid
- Buying a scraper bar by its title alone. A title can mention a model that is close to yours but is not the same.
- Assuming the Snow Joe name means the part fits. The listing for the scraper blade names the SJ619E, and the listing does not say it fits the SJ627E.
- Forgetting the hardware. Two listings in this group say hardware is not included or sold separately.
- Running the machine on a long extension cord without checking the gauge. The listing says not to use an extension cord over 100 feet, and the manual gives the gauge.
- Skipping the measurement of the old bar. A length or hole spacing that is slightly off can stop the bar from fitting.
FAQ
Does the SJ619E scraper blade fit the SJ627E?
The listing names the SJ619E and does not say it fits the SJ627E. Do not assume it does. Check the model number on your machine and compare the part’s dimensions with the bar you remove, or ask the seller to confirm the model in writing before you buy.
Is the SJ627E a snow blower or a snow thrower?
The listing calls it a corded electric snow blower. The Wikipedia entry on snow blowers says the term is a misnomer, because the machine removes snow with an auger or impeller rather than blowing it. The name in the listing does not change how the part fits.
Do I need new hardware for a scraper bar?
It depends on the listing. Some listings say hardware is not included, and one says hardware is sold separately. Reuse your existing fasteners if they are in good condition and fit the new bar’s holes. Otherwise, buy hardware that matches the hole size and spacing.
How far can the SJ627E throw snow?
The listing states a maximum throw distance of 25 feet. The throw distance depends on snow type and conditions, so treat the listing figure as the maximum it states.
What power does the SJ627E need?
The listing describes it as corded electric with a 15-amp motor and a 120-volt power source. Use an outlet that matches the listing, and follow the manual’s cord advice.
Can a scraper bar from another brand work on the SJ627E?
Only if the listing names the SJ627E or a compatible model, and the dimensions and hole pattern match your old bar. The scraper bars in this group name other brands’ machines, so they are not listed for the SJ627E.
Where do I find the model number?
Check the label on the machine, usually near the engine or the housing, and the manual. Match the model number exactly, including any suffix, before you order a part.
Bottom line
For a snow joe sj627e scraper bar, the model number is the first check. No scraper bar in this group is listed for the SJ627E, and the Snow Joe scraper blade is listed for the SJ619E. Measure your old bar, count its holes, and confirm the model in writing if the listing does not name it. If you cannot confirm a match, skip the part and check with Snow Joe for the correct replacement. You may not need a new bar at all if your current one is still in good shape and clears snow as the machine intends.
Sources
- Wikipedia, Snow blower: the machine removes snow with an auger or impeller, so the term snow blower is a misnomer; snow blowers can be electric or gas-powered
