Best Battery Pole Chain Saws for Pruning Jobs
As an Amazon Associate we earn from qualifying purchases.
A pole chain saw battery model combines a telescoping pole with a chain saw head that runs on a rechargeable pack, so you can cut high limbs from the ground without a ladder or a gas engine. The best choice depends on the reach you need, how many batteries the kit includes, how much the head weighs at the end of the pole, and whether the saw also works as a handheld mini chainsaw. This roundup compares eight listings using only the bullets and specifications printed on each product page, and it notes where a listing leaves a point open.
Quick answer
- Look for a listing that states reach in feet and says whether the figure assumes a person of a given height, since that changes the real working height.
- Two batteries are common in this group, and runtime figures range from about 50 minutes to 120 minutes depending on the battery and the listing.
- Check whether the saw is a 2-in-1 pole saw and mini chainsaw, a bare pole saw, or a mini chainsaw with a pole sold together, because the weight and handling change with each setup.
How to read battery pole saw listings
Most listings in this category use the same vocabulary, and the words do not always mean the same thing. Reach is the first one to check. Some listings give the length of the telescoping pole alone, while others give a total reach figure that includes the operator’s height. The Supstable and Seesii listings both use an overhead figure based on a standard height, which is useful for comparison but still depends on the person holding the pole. The DNLBBO listing, for example, combines a 9.5-foot pole with a 6-foot user to reach 16 feet of working height, and that total is only as good as the user’s height and grip.
Battery count is the second thing to check. A pole chain saw battery kit can come with one pack, two packs or none. Listings that say two 4000mAh batteries generally imply more continuous cutting than a single pack, but the listing’s own runtime statement is the only figure to rely on. Several listings in this group state up to 100 minutes of runtime with two 4 Ah batteries, while one states up to 120 minutes with two 4000mAh batteries and a larger number of cuts per charge. Those statements are seller claims, so compare them only against the same battery arrangement.
Weight is the third check. A saw that feels light in the hand can become heavy when the pole is extended and held overhead. Listings in this roundup give the handheld weight and the total weight with the pole separately, which is the more useful pair of numbers. Motor type is the fourth point: several listings name a brushless motor, and one names a brushed motor, so read the motor line before you assume a difference in lifespan or noise.
The eight listings
Supstable S5 Sky 8-inch and 6-inch pole chainsaw kit
This Supstable kit is built as a 2-in-1 pole saw and mini chainsaw. Its title gives a 16-foot reach, two 4.0Ah batteries and a charger, and the specifications list an 800-watt power figure and a chain speed of 30 feet per second. The kit includes a 6-inch guide bar and an 8-inch guide bar with a protector, plus an upgraded extension pole, oil bottle, gloves and goggles. The listing states a two-year manufacturer warranty. The item weight is listed at 10 pounds, which is the heaviest of the kits here with the pole fitted, so the shoulder strap in the kit matters for longer sessions.
WORX WG323 20V 10-inch 2-in-1 pole saw
The WORX WG323 is a 20-volt cordless chain saw with a pole attachment that the listing says reaches up to 12 feet. It is the only listing in this roundup that includes its battery and charger and sits on a battery platform the listing describes as shared with more than 75 other WORX PowerShare tools. The bullets describe automatic tool-free chain tension and automatic chain lubrication with an oil level indicator. The listing gives a saw weight of 10 pounds and says the batteries are the same packs used in other WORX machines. The shorter reach compared with the other kits makes it a better fit for lower limbs.
SEESII P8 Ace 2-in-1 cordless pole saw and mini chainsaw
This SEESII kit pairs two 4000mAh batteries with an 800-watt motor and a manganese steel chain, according to its bullets. The listing says the mini chainsaw weighs 3.6 pounds and the pole saw weighs 7.2 pounds, and it describes a telescoping pole that adjusts from 6 to 10 feet. The bullets also list eight safety features, including a security lock, safety baffles and a shoulder strap, and they name a three-year warranty. The listing supports a clear case for buyers who want the separate handheld mode, since the handheld weight is stated separately from the pole weight.
SEESII P8 Nex cordless pole saw
The SEESII P8 Nex listing uses a similar kit structure with dual 4.0Ah batteries. Its bullets say the pole extends from 4.6 to 10 feet and gives up to 16 feet of overhead reach with a multi-angle cutting head. The stated weights are 3.8 pounds as a mini chainsaw and 7.2 pounds with the pole. The listing describes ambidextrous controls and says the automatic chain lubrication has a transparent window to check the oil level. It is a good comparison point with the P8 Ace because the two listings state close weights but differ in pole length and motor description.
SEESII 10-inch 2-in-1 cordless pole saw
This SEESII listing gives a 10-inch guide bar and says it handles branches up to 10 inches in diameter. It includes two 4000mAh batteries and a charger and states up to 120 minutes of runtime. The motor is described as a 900-watt brushless motor. The telescoping pole reaches up to 10 feet, which the listing says gives up to 16 feet of total reach with user height. The handheld chainsaw is stated at 4.6 pounds and the complete pole saw at 8 pounds. Among the kits here it is the one whose bar size is most clearly stated in the title, which helps when a bigger cut is the reason for buying.
Supstable APR600 6-inch cordless pole chainsaw
The Supstable APR600 is a smaller kit built around a 6-inch guide bar, with two 4000mAh batteries, extra chains and a charger. The listing gives a 2-year warranty and a reach of up to 16 feet. The useful difference is in lubrication: this listing describes a manual oil pump rather than an automatic system, and it asks the user to press the pump before cutting and check lubrication every 5 to 10 minutes. The listing states a weight of 3.4 pounds for the chainsaw, which makes it the lightest handheld unit in this group. Its motor is described as a brush motor, which is a different spec from the brushless units above.
DNLBBO 8-inch brushless pole saw
The DNLBBO listing gives a 1000-watt brushless motor and a chain speed of 35 feet per second. It uses one 4000mAh battery, and the listing says a second battery can be bought separately from the same store. The pole adjusts from 5.4 to 9.5 feet, which the listing says gives up to 16 feet of working height for a user of average height. The handheld chainsaw is stated at 3.6 pounds and the full pole saw at 5.69 pounds, the lowest total weight figure in this roundup. The buyer should plan for the single battery if longer cutting sessions matter.
Husqvarna 530iP4 10-inch professional battery pole saw
The Husqvarna 530iP4 is the one listing in this roundup that uses a 40-volt fixed-length battery design, and the listing states a battery and charger are not included. Its bullets name a 13-foot reach, a 10-inch bar, an H37 chain, a battery status indicator on the keypad and a rear impact guard. The listing describes the cutting power as equivalent to a 30cc engine. Because the battery is sold separately and is a different platform from the 20-volt and 4 Ah packs in the other listings, it suits a buyer who already owns Husqvarna 40-volt batteries rather than one building a new kit.
Matching a pole chain saw battery to your yard
For trimming low branches on a small lot, a shorter reach can be enough. The WORX and the Supstable APR600 give reach figures that suit that job, and the APR600’s lighter handheld weight is useful when you spend more time at the chainsaw end of the tool. For taller trees, the listings that state 15 or 16 feet of total reach are the realistic options, and it is worth confirming how each figure was measured, since several use a 6-foot person as the reference.
Battery platform matters when the saw will be part of a larger set of tools. The WORX listing says its batteries are shared with many other tools, and the Husqvarna listing is built around its own 40-volt pack. A battery platform you already own is usually the cheapest route to a working saw, while a bundled kit with two packs is the simpler choice if you have no batteries at home. Do not assume a kit includes a charger unless the listing states it, because several listings here give the battery and charger status separately.
Chain and bar size affect the job. An 8-inch bar fits most branch work described in these listings, while a 10-inch bar is stated for thicker branches. Check the chain profile on the bar you receive, and keep the spare chains and oil that the kits sometimes include. Automatic lubrication, where the listing states it, reduces a routine step, but a manual pump means you have to use it before each cut.
Safety is part of the choice too. The SEESII P8 Ace listing describes a security lock and safety baffles, the SEESII P10 listing describes a dual-button activation with a safety lock, and the Husqvarna listing mentions a rear impact guard. A pole chain saw is a tool that works above head height, so the features the listing names are worth reading closely. Pair the purchase with eye and hand protection, and see the How to Use a Pole Saw Safely guide before the first cut.
What the listings leave open
Many listings in this group do not state a runtime for a single battery in minutes, a chain speed for every model, or a pole weight in every configuration. Where a figure is missing, the page should be read as silent on that point. Several bullets make claims about quieter running or fewer emissions. These are general statements from the listings, not measured results, and the roundup treats them as such.
Shipping or return terms, and the length of a warranty in months, are not compared here beyond what the listing states in its bullets. A listing that says two years or three years is reporting its own warranty, and you should check the seller’s return and support terms on the product page before you buy.
For a wider look at pole saws that run on a single battery platform, see the Best Cordless Pole Saws: Reach, Battery Fit and Chain Specs guide. It covers the same type of tool with a different selection of listings.
FAQ
What is a pole chain saw battery tool?
It is a cordless pole saw that uses a rechargeable battery to drive a chain on a bar at the end of a telescoping pole. Many models also detach from the pole and run as a handheld mini chainsaw, which is why the kits in this roundup are often described as 2-in-1 tools.
How many batteries should a pole chain saw come with?
Two batteries are common in this group, because a second pack lets you keep cutting while the first recharges. The listings state runtimes of up to 50 minutes per pack in some cases and up to 100 or 120 minutes with two packs in others. Compare runtimes only between kits with the same number of packs.
Which pole chain saw battery has the longest reach?
Several listings state up to 16 feet of overhead reach, including the Supstable S5 Sky, the SEESII listings and the Supstable APR600. The DNLBBO listing states 16 feet of working height for an average user. Check how each reach figure was measured, because the user’s height is a large part of the total.
Are these kits lighter than a gas pole saw?
Several listings say they are lighter than a gas pole saw, and some state specific weights. The SEESII P8 Nex lists 7.2 pounds with the pole, and the DNLBBO lists 5.69 pounds. Weigh the total with the pole extended, since that is the load you hold overhead.
Does the kit come with a charger?
Most kits in this roundup list a charger, but the Husqvarna 530iP4 lists the battery and charger as not included. Read the included components line on the listing before you buy.
Do I need to oil the chain by hand?
It depends on the model. The Supstable APR600 uses a manual oil pump and asks for a check every 5 to 10 minutes, while several other listings describe automatic lubrication. Where the listing states automatic oiling, the oil level still needs checking.
Bottom line
Choose the kit whose reach, battery count and weight match the height and size of the branches you cut most often. If you already own a battery platform, look first at the tool-only listings that name a compatible pack. If you are starting from nothing, pick the two-battery kit with a reach and weight you can hold comfortably for a full session, and check the included components before you order.
