Best WORX Cordless Pole Saw
As an Amazon Associate we earn from qualifying purchases.
If you are searching for the best worx cordless pole saw, start with three numbers: total reach, weight and the battery you already own. The WORX WG349.9 is a 20V pole saw that its listing describes with up to 13.3 feet of total reach and a weight of 8 pounds, and the listing style says the battery and charger are not included. This guide covers only what that listing states, what the pruning and safety sources we opened say, and what neither one covers.
Quick answer
- The listing states a 20V battery pole saw with up to 13.3 feet of total reach, a tool-free telescoping pole that adjusts up to 13 feet, and a cutting speed of 16 ft/s.
- The listing style reads “Battery + Charger Not Included”, so a battery and charger belong in your budget unless you already own them.
- Consider it when you want reach from a tool the listing puts at 8 pounds.
- Skip it if your highest cut is above the listed reach, or if you need a warranty, runtime or cut-diameter figure before you buy, because the listing does not state them.
The product at a glance
The table lists only what the WORX listing states, and each cell says “not stated” where the listing is silent. We read the listing on 2026-10-23. This ASIN was not in our stored product file, so that single read is the data source for the figures below.
| Item | What the listing states |
|---|---|
| Brand | WORX |
| Model | WG349.9 in the title; the product description says WG349 |
| Power source | Battery powered |
| Battery platform | 20V, PowerShare (title) |
| Battery and charger | Not included in this listing style |
| Cutting head | 8 inch chainsaw (title) |
| Motor type | not stated |
| Total reach | Up to 13.3 ft |
| Telescoping pole | Tool-free adjustment up to 13 ft |
| Cutting speed | 16 ft/s |
| Cutting angles | 3 (0°, 15°, 30°) |
| Chain tension | Adjusted with the turn of a button |
| Chain lubrication | Automatic, to extend chain life |
| Weight | 8 lbs |
| Product dimensions | 112.2″L x 7.83″W x 3.43″H |
| Horsepower field | 2.7 hp |
| Cutting width or working width | not stated |
| Height range | not stated (the listing gives reach) |
| Runtime | not stated |
| Warranty | not stated |
The specs above use the listing’s own wording. The product link for this exact model follows.
Who it suits
The WG349.9 suits a yard owner whose highest branches sit inside the listed 13.3 feet of total reach, and who wants a lighter overhead tool than a longer pole with a heavy head would give. The 8-pound figure is the listing’s own number, and it is the main reason to put this model on a short list. Check that figure against your own arm strength before you buy, since the listing does not say how the weight is spread along the pole.
It also suits someone who cuts from different positions. The listing says the head has three cutting angles, 0°, 15° and 30°, to reach branches that sit out of the way, and it says you can switch between vertical and horizontal cutting by rotating the handle.
It fits a buyer who already plans around the 20V battery family. The title names PowerShare and 20V, so the tool belongs to that platform. The listing does not spell out pack compatibility beyond that wording, so confirm the pack you own before you order. If you are weighing other brands, these comparisons cover other pole saws: Seesii and EGO Power+ pole saws compared and EGO Power+ and Autubin pole saws compared.
Skip it if
Skip it if your highest cut is above the listed reach. The listing states up to 13.3 feet of total reach, and it does not state a working height, so plan from the reach figure rather than from a number you have not measured.
Skip it if you expect the battery and charger in the box. The listing style reads “Battery + Charger Not Included”, and the product note says the bare tool does not include the battery pack and charger.
Skip it if you need a figure the listing leaves out. Runtime, cut diameter, motor type and warranty are all marked not stated in the table above, so a buyer who needs those numbers has to ask the seller or read the manufacturer’s material before ordering.
Safety near branches and power lines
A pole saw places the cutting head well above the operator, so the safety sources focus on overhead hazards before the first cut. The OSHA tree care hazards page puts it plainly: “Overhead power lines, falling branches, and faulty safety equipment are just a few of the dangers.”
The OSHA eTool on tree trimming sets the starting rule: “Assume that electrical lines are energized until proven otherwise.” It says to keep a proper distance from overhead electrical power lines unless the lines are deenergized and visibly grounded, and it tells you to contact the utility company to help locate and mark utility lines before work begins.
For the cut itself, the University of Illinois Extension page says: “Make pruning cuts just outside the branch bark collar and have a smooth finish.” For larger limbs it recommends a three-point cut: “If larger branches are being removed, a three-point pruning cut is recommended to avoid ripping the bark as the limb falls during the pruning activity under the weight of the branch.” It also notes that “Additionally, broken limbs in the canopy pose a fall risk and should be removed.”
The UF/IFAS pruning page adds two rules. Avoid flush cuts: “Avoid making flush cuts as this will cut into the actual growth layer of the tree and prevent proper healing.” For big trees, bring in a certified professional: “Hire an arborist certified by the International Society of Arboriculture to prune trees taller than about 15 feet.” The listed reach of 13.3 feet is shorter than that 15-foot line, which is why the arborist advice matters for taller trees.
The listing links a user manual PDF. We did not open that PDF as a source, so its safety instructions are not covered here. Read it before the first cut.
What the listing does not say
The listing is clear that the battery and charger are not included in this style. It does not name the pack that matches the tool beyond the 20V PowerShare wording, and it does not give a runtime or a battery capacity for this model.
The chain tension adjusts with the turn of a button, and the listing says the chain lubricates automatically. It does not say whether bar oil comes in the box or how often the chain needs oil in use, so those points remain open.
The listing shows a horsepower figure of 2.7 hp. It is printed as a specification, and we report it only as that. The listing does not explain how the figure was measured, so we do not compare it with gas or corded pole saws. It also gives no cutting width, no working height, no warranty term and no largest limb diameter.
Buying checklist
- Measure your highest cut and confirm it sits inside the listed 13.3 feet of total reach.
- Confirm you own a 20V battery and charger, since the listing style does not include them.
- Check whether the 8-pound figure suits your arm and posture, because the listing does not say how the weight is spread.
- Ask the seller about bar oil, runtime and warranty, because those points are not stated in the listing.
- Read the manual before the first cut, and treat the power line and distance rules above as the minimum.
Mistakes to avoid
The first mistake is buying on the reach figure alone. The listing states up to 13.3 feet of total reach, but it does not show a working height for a standing user. Measure the tree from the ground to the cut point, then compare that height with the reach before you order.
The second mistake is assuming the battery is in the box. The listing style reads Battery + Charger Not Included, and the product note repeats that the bare tool does not include the battery pack and charger. Count a pack and charger in your budget, and check the pack you already own against the 20V PowerShare wording in the title.
The third mistake is skipping the cut order. The Illinois Extension page recommends a three-point cut for larger limbs to avoid ripping the bark as the limb falls, and the UF/IFAS page warns against flush cuts. A pole saw brings the head to the branch, but the bark still tears if the limb drops its full weight onto the final cut, so the undercut comes first.
How we chose
This post covers one product: the WORX cordless pole saw with ASIN B07WBV4HY5, which the listing names WG349.9. It is in this post because it is the single product assigned for this review. We did not rank it against other pole saws, and the post contains no ranking, no sale information and no review count.
The product data comes from one read of the Amazon listing on 2026-10-23. The ASIN was not in our stored product file, so we saved only the title, bullets and specifications from that page and recorded nothing else from it. The safety and pruning points come from four university and government pages on tree and pole saw work. We opened those pages on 2026-10-22 and reuse them here with that original opening date.
We did not use retail or review pages for facts. We searched for a WORX page for this exact model and did not find one among the sources we opened, so the product facts rest on the listing text. The OSHA tree care page is a general hazard page, so we cite it only for the list of dangers and not for any product-specific instruction. Each section below uses facts from the five sources at the end of the post, or says that the listing is silent.
What we could not verify
We could not verify runtime, motor type, cutting width, the largest limb the saw cuts, warranty terms, or the exact battery packs that work with this model. The listing does not state them, and the sources we opened do not cover this model.
We also could not verify how the reach works in practice for a given person or tree. The listing gives the reach figure and the cutting angles, and nothing more. Any height plan in this post is therefore an assumption, which you should check against your own yard before you buy.
FAQ
Is the WORX WG349.9 a battery pole saw?
Yes. The listing says Power Source: Battery Powered, and the title names a 20V battery platform.
Does the WG349.9 come with a battery and charger?
Not in the listing style we read. The style reads Battery + Charger Not Included, and the product note says the bare tool does not include the battery pack and charger.
How far can it reach?
The listing says up to 13.3 feet of total reach, and it says the telescoping pole adjusts without tools up to 13 feet. It does not state a working height for a standing user.
How much does the saw weigh?
The listing says 8 pounds. It does not say whether that figure includes a battery, so check before you plan a long session.
Does the listing say how long a charge lasts?
No. The listing gives no runtime, and runtime depends on the pack you add, so the figure is not stated here.
Is this the right pole saw for trees taller than about 15 feet?
The listing alone does not settle that. Its reach is 13.3 feet, and the UF/IFAS page says to hire a certified arborist for trees taller than about 15 feet, so taller trees belong with that professional.
Bottom line
Buy the WG349.9 only when your highest cut sits inside the listed 13.3 feet of total reach and you already have a 20V battery and charger, because the listing style includes neither. If you need runtime, warranty or cut-diameter figures first, the listing does not give enough to decide.
Sources
- WORX Cordless Pole Saw, 20V 8″ Chainsaw, WG349.9, Amazon listing (opened 2026-10-23)
https://www.amazon.com/dp/B07WBV4HY5 - Tree Care Industry – Hazards and Solutions, OSHA (opened 2026-10-22)
https://www.osha.gov/tree-care/hazards-solutions - eTool: Waste debris removal and reduction: Tree Trimming, OSHA (opened 2026-10-22)
https://www.osha.gov/etools/hurricane/activity-sheets/waste-debris-removal/tree-trimming - Cutting back branches leaves trees with healthier outlook, University of Illinois Extension (opened 2026-10-22)
https://extension.illinois.edu/news-releases/cutting-back-branches-leaves-trees-healthier-outlook - Pruning in Three Steps, UF/IFAS Gardening Solutions (opened 2026-10-22)
https://gardeningsolutions.ifas.ufl.edu/care/pruning/pruning-in-three-steps/
