Best Brush Cutter Blades for Weed Eater Heads
As an Amazon Associate we earn from qualifying purchases.
A brush cutter blade for weed eater heads is a metal blade or wire head that mounts on the straight shaft of a trimmer in place of the string head, so the tool can cut thicker weeds, saplings and brush. The right blade depends on three things: the arbor or bore size on your trimmer, the blade type (steel, carbide-tipped saw blade or steel wire brush) and the engine size the listing recommends. The eight options below are taken only from their Amazon listing details, with notes where a listing contradicts itself.
Quick answer
- Check the arbor or bore size first. The listings in this group name 1 inch (25.4 mm) or 20 mm arbors, and several include adapter kits for both.
- Use a carbide-tipped 80-tooth saw blade for woody brush and saplings. The 6-blade kit listing says its carbide blade is for brush and weeds, not for cutting trees or wood.
- Use a steel wire brush head or a multi-blade steel head for weeds, moss and rust removal around edges and walls.
- Read the power and guard warnings in each listing before you change a blade. Several listings say the power must be off and the guard must stay in place.
How to choose a brush cutter blade for a weed eater
Start with the trimmer, not the blade. A brush cutter blade attaches to the gear case of a straight shaft trimmer through an adapter kit, and the listings in this group are built around two common setups: a 1-inch (25.4 mm) gear case bore and a 20 mm arbor. Some sellers ship both adapters in one package, which is useful if you do not know your trimmer’s arbor size. If the listing says the blade fits either size, it still helps to confirm the spline count of the adapter kit, because the listings name 6-tooth and 10-tooth kits.
Next, match the blade type to the job. A saw-type blade with teeth cuts brush and small branches faster than a plain steel blade. A multi-blade steel head is a middle option for heavy weeds and stalks. A wire brush head does not cut like a blade. It sweeps and scrubs, which suits moss, rust, cracks and the edges of paving. Matching the type to the job matters more than chasing the largest diameter, because a large blade on a small engine does not make the cut better.
Finally, check the engine size. The SHUZIYU listings say the blade is for equipment above 30 cc and recommend more than 50 cc. Other listings in this group do not give an engine size. If your trimmer is smaller, pick a steel or wire option and leave the heavy 12-inch saw blade for a larger machine.
Arbor size and adapter kits
The arbor is the center hole the blade sits on. A 1-inch arbor and a 20 mm arbor are both common for these blades, and the listings say which one they fit. The ATIE blades say they fit either 1 inch (25.4 mm) or 20 mm. The SHUZIYU 12-inch blade lists a 1-inch arbor with a 7/8-inch to 5/8-inch washer, so it is a different fitting from the ATIE blades. The CZS and NeJesZoe listings describe a 25.4 mm gear case, and the CZS listing states that its included adapter kit is 6 splines in one bullet and 10 splines in another. Confirm the spline count before you buy.
Adapter kits usually include a thrust plate guard washer, a thrust washer, a rider plate or a collar nut, and a wrench. Some kits also include a screwdriver. The NeJesZoe listings show two complete kits in the package, one for a 6-tooth spline and one for a 10-tooth spline. That is useful if you have two different trimmers, but it means you must install the correct kit each time.
Blade types and what the listings say
Steel saw blades are usually described as manganese or SK-5 steel. The CGNRONEAU listing describes a manganese steel circular saw blade for thicker shrubs and branches, and it also calls the same blades carbide tipped in a separate bullet. The listing does not clearly settle which material applies, so check the product photos and description before you buy if the material matters to you.
Carbide-tipped saw blades have teeth brazed or welded with carbide. The ATIE 80-tooth blade says the carbide tip is estimated to last about 10 times longer than plain steel. That is the listing’s estimate, not a measured figure. The IRmm 36-tooth blade and the ATIE 80-tooth blade both mention carbide construction. Carbide blades are the right choice when the job is woody material, but the listings warn against cutting trees or wood with the 80-tooth blade.
Multi-blade steel heads, such as the 6-blade steel head in the 2-pack kit, rotate and chop grass and light weeds. Plastic and nylon line options are not part of this group. Wire brush heads use twisted or coiled steel wire. They are sold for weeds between bricks, moss on walks and rust removal. Their listings say they are made of steel wire with a holding plate, and that the head is designed to tolerate hits from stones and tree stumps. The listings do not give a numeric lifespan that can be verified.
Comparison of the eight blades
| Product | Type | Size listed | Teeth or pieces | Arbor or bore listed |
|---|---|---|---|---|
| CGNRONEAU 7-piece saw blade set | Saw blade, 2 blades | 6 inch, 1.1 mm thick | 2 blades plus 5 parts | 5 mm aperture |
| NeJesZoe 10-inch wire brush head | Steel wire brush | 10 inch | Not stated | 25.4 mm (1 inch) bore |
| 2-pack 6-blade steel head kit with 80T carbide blade | Steel head plus carbide saw | 10 inch | 6 blades; 80 teeth | 1 inch and 20 mm adapters |
| ATIE 10-inch 3-tooth steel blade | Steel blade | 255 mm, 3.0 mm thick | 3 teeth | 1 inch or 20 mm |
| ATIE 8-inch 80-tooth carbide blade (2-pack) | Carbide saw blade | 8 inch | 80 teeth | 1 inch or 20 mm |
| CZS weed eater head with 36-tooth brush blade | Steel razors plus brush blade | Not stated | 6 steel razors; 36 teeth | 25.4 mm (1 inch) gear case |
| NeJesZoe 8-inch wire brush cutter head | Steel wire brush | 8 inch (200 mm) | Not stated | 25.4 mm (1 inch) bore |
| SHUZIYU 12-inch 3-tooth bend blade | Heavy duty steel blade | 305 mm, 4 mm thick | 3 teeth | 1 inch arbor |
Where a listing does not state a value, the table says “Not stated.” The table does not show prices or ratings, and it does not rank the blades. Use it to compare what each listing says, then read the full product description before you order.
Engine size and safety notes
Every blade in this group is a cutting accessory. The listings repeat the same safety points, and they are worth following. Keep the power off when you change a blade. Do not run a trimmer with its guard removed. Wear gloves when you handle a sharp blade, because several listings warn that the edges are sharp. Tighten the lock nut or collar nut so the blade does not work loose during use.
The SHUZIYU 12-inch blade has a specific warning: use it on equipment above 30 cc and preferably above 50 cc. The same listing says the blade is designed with a less sharp edge and a higher weight, which suits bushes at higher rotational speed. A small electric trimmer is not the right machine for it. The IRmm blade lists its carbide teeth for brush and saplings, and the ATIE listing names thick brushwood, bushes and dense grass. Neither listing says the blade is suited to trees.
The CZS listing notes that the steel razors can retract if they hit a stone, and that you can flip the blade to use the other set of edges when one side dulls. The listing says to make sure the head is fixed on the trimmer before use, and to wear protective equipment.
The eight blades, one by one
CGNRONEAU 7-Piece Manganese Steel Round Saw Blade Set
This set contains two 6-inch circular saw blades, one lawn mower wrench, two nuts and two shims. The listing says the blades suit cutting thicker shrubs and branches, cutting weeds and small branches, and trimming soft grass. The blades have a 5 mm aperture and a 1.1 mm thickness. The listing says to keep the power off when changing the blade and states that the guard must not be removed. It also says the blades suit lithium battery weed whackers and cordless mowers. Pick this set if you want a small saw blade for light brush and have a trimmer with a 6-inch cutting diameter in mind.
NeJesZoe 10-Inch Steel Wire Weed Wheel Brush Head
This is a steel wire brush head with a 10-inch diameter and a 1-inch (25.4 mm) bore. The package lists two adapter sets: one with a 10-tooth thrust plate guard washer and thrust washer, and one with a 6-tooth set, plus collar nuts in M10x1.25 and M10x1.0 sizes, an L-wrench, a T-wrench and a screwdriver. The listing names Husqvarna, Stihl, Honda and Hitachi trimmers as compatible, and says the brush suits moss, corners between bricks, sand and gravel. The listing says the head is not easy to break, which is a listing claim rather than a measured result. The head weighs 2.46 pounds according to its specifications. Choose it for cleaning and corner work rather than for heavy stems.
2-Pack 6-Blade Steel Brush Cutter Head with 80T Carbide Blade
This three-piece kit contains two 6-blade steel cutting heads and one 10-inch 80-tooth carbide-tipped saw blade. The listing says the adapter kit includes rings and washers for both 1-inch (25.4 mm) and 20 mm arbors, and it names Stihl, Husqvarna, Echo, Shindaiwa, Redmax, Ryobi, Hitachi, Oregon and Homelite straight shaft trimmers. The bullets also say the user should check the trimmer’s arbor size before ordering. The steel heads are described as hardened manganese steel. The listing recommends the carbide blade for brush and weeds and says it is not for cutting trees or wood. The kit weighs 3.16 pounds. It suits a user who wants a steel head for weeds and a carbide blade for woody growth in one purchase.
ATIE 10-Inch 3-Tooth Steel Brush Cutter Blade
This single steel blade measures 255 mm (10 inches) in diameter and 3.0 mm in thickness. The listing says it fits either a 1-inch (25.4 mm) or 20 mm arbor, which helps if your trimmer’s arbor size is unknown. The bullets say it is great for cutting brushwood, bushes and densely grown grass. The listing names the model as AT0706-1 and the part number as TRTA04829. It is a plain steel blade with three teeth, so it fits a user who wants a larger steel blade without the carbide tips. Keep it away from heavy trees, as the listing describes its use for brush and bushes.
ATIE 8-Inch 80-Tooth Carbide Tip Blade, 2-Pack
This pack contains two 8-inch carbide-tipped saw blades with 80 teeth. The listing says the blades fit either a 1-inch or a 20 mm arbor, and that the teeth are brazed or welded. The bullets say the carbide tip is estimated to last about 10 times longer than plain steel and that more teeth create more cutting surfaces. The listing says the manufacturer is CE certified and that the package includes two blades with washers. This is the blade in the review section below, where its listing facts are set out in more detail.
CZS Weed Eater Head with 6 Steel Razors and 36T Brush Blade
This package combines a six-razor trimmer head with a 36-tooth brush blade. The listing says the steel is manganese, which it describes as sturdy and durable. The razor head has double-sided edges, so you can flip it when one side dulls. The listing says the razors retract if they strike resistance such as stones. The brush blade is for branches, small trees, weeds and shrubs. The listing says the adapter kit has 10 splines in one bullet, but a later bullet says the included adapter kit is 6 splines. Confirm the spline count with your trimmer before you order. The model is LIUYIED.
NeJesZoe 8-Inch Steel Wire Rotary Weed Brush Cutter Head
This wire brush head is 8 inches (200 mm) across, with a 1-inch (25.4 mm) arbor bore. The listing says it comes with two adapter kits, one for Stihl-type trimmers with a 10-tooth washer and one for straight shaft trimmers with a 1-inch arbor and a 6-tooth thrust plate guard washer. It names Husqvarna, Stihl, Honda, Oregon and Hitachi as compatible brands. The listed applications are mowing lawns, weeds in corners and between bricks, moss on sidewalks, and rust removal. The model is listed as brush 8in and the part number as NeJesZoe00bru. This head is the smaller of the two NeJesZoe wire heads in this comparison.
SHUZIYU 12-Inch 3-Tooth Bend Heavy Duty Blade
This steel blade has a 12-inch (305 mm) diameter, 3 bent teeth and 4 mm thickness, with a 1-inch arbor. The listing says it fits all circular arbor equipment and includes a 7/8-inch to 5/8-inch circular adaptor washer. The bullets say the steel is SK-5, which the listing estimates lasts about 10 times longer than normal carbon steel. The listing says the blade has a not very sharp edge by design and is intended for higher weight and higher rotational speed. It also warns that the blade is for heavy duty work and should be used on equipment over 30 cc, with more than 50 cc recommended. The model is B-305-3T-BEND.
Review: ATIE 8-Inch 80-Tooth Carbide Blade (2-Pack)
If you want one saw blade for woody brush, this two-pack is the most direct match in the group. The listing describes an 8-inch diameter, 80 teeth, and carbide tips brazed or welded onto the blade. It states that the blades fit either a 1-inch or a 20 mm arbor, which is the main fit question for most straight shaft trimmers. The listing says that a carbide tip is estimated to last about 10 times longer than plain steel, and it explains that more teeth create more cutting surfaces. Both statements are the listing’s own claims, and the listing does not provide a test method for them.
The package includes two blades with washers. That matters because you have a spare if one is damaged during a cut. The model is AT0880-2 and the part number is AT0880. The listing describes the manufacturer as CE certified, which is a certification claim from the seller that you can confirm on the product page or packaging. The listing does not state a rotational speed, a weight or a maximum cutting diameter in the bullets, so check the trimmer’s manual for its rated speed before you mount any saw blade.
The fit is the main issue to check. The ATIE listing says the blade works on either arbor size. Confirm the arbor on your trimmer and install the correct adapter washer. Keep the guard in place, keep the power off during installation and tighten the nut firmly before starting. The listing’s bullets focus on brush, bushes and branches, and they do not describe the blade for trees. Use it for brush and shrubs, and use a dedicated pruning tool for trunk-sized wood.
Two close alternatives from the same pack fit the same question. The IRmm 9-inch 36-tooth carbide blade (2-pack) has a 1-inch arbor bore and two adapter kits, and its listing describes it for thick grasses, shrubs and saplings. The ATIE 10-inch 3-tooth steel blade is a plain steel option for a user who wants a larger steel blade without carbide. Choose the 80-tooth ATIE blade when you want more cutting edges for brush, the IRmm blade when you want a 9-inch carbide option with two adapter sets, and the steel blade when the job is light brush and budget is the first concern.
Mistakes to avoid
- Buying a blade before you know the arbor size. Measure or check the trimmer’s manual first, then match the adapter kit.
- Using a large saw blade on a small trimmer. The SHUZIYU listing recommends more than 50 cc, and it warns against use on equipment below 30 cc.
- Cutting trees or wood with a brush blade. The listings for the carbide and steel blades describe brush, weeds and shrubs.
- Removing the guard or changing the blade with the engine or motor running. Several listings say this directly.
- Mixing spline counts. The CZS listing contains two different spline counts, so check the adapter before you assemble.
- Assuming a wire brush cuts like a blade. Wire heads sweep and scrub, which is useful for moss and rust, but they are not for brush.
FAQ
What size arbor do most brush cutter blades need?
Most blades in this group list a 1-inch (25.4 mm) bore or arbor, and several also fit a 20 mm arbor with the correct adapter. The ATIE blades say they fit either size. Check your trimmer’s gear case or manual before you buy. If the listing does not say which arbor the blade fits, do not buy it until you have confirmed.
Can I use a saw blade on a weed eater?
The listings in this group describe saw blades for a trimmer equipped with a straight shaft and a suitable adapter. They describe the blades for brush, shrubs, saplings and thick weeds. The 80-tooth carbide blades say they are for brush and weeds and are not for cutting trees or wood. The SHUZIYU 12-inch blade warns that it is for heavy duty work and recommends an engine above 50 cc.
What is the difference between a steel blade and a carbide blade?
A steel blade is cut from a single piece of steel, while a carbide blade has carbide tips brazed or welded onto the teeth. The ATIE 80-tooth listing says its carbide tip is estimated to last about 10 times longer than plain steel. That is the listing’s estimate. The CGNRONEAU listing describes its blades as both manganese steel and carbide tipped, so read its description carefully before choosing it.
Do I need the adapter kit that comes with the blade?
Usually yes. The adapter kit holds the blade on the gear case, and each listing that includes one gives a set of washers, a collar or nut and a wrench. Use the adapter that matches your trimmer’s spline count. The CZS listing names both 6-spline and 10-spline adapters across its bullets, so check which one comes in your package.
Are wire brush heads the same as brush blades?
No. A wire brush head uses twisted steel wire to sweep and scrub weeds, moss and rust, while a brush blade uses a metal cutting edge or teeth. The NeJesZoe and OFCOX listings describe wire heads for corners, sidewalks and rust. The ATIE and IRmm listings describe toothed or edged blades for brush and bushes. Choose the type that matches the job.
Which blade should I choose for a small trimmer?
A smaller trimmer should use a smaller or lighter option, and the listings do not all give a full engine size. The CGNRONEAU 6-inch blades and the NeJesZoe 8-inch wire head are the smaller options in this comparison. Avoid the 12-inch SHUZIYU heavy duty blade, because its listing asks for an engine above 30 cc and recommends more than 50 cc.
Bottom line
Pick the blade by fit first, then by job. Confirm the arbor size and the spline count, then choose a carbide-tipped saw blade for brush and shrubs, a steel head for mixed weeds, or a wire brush head for moss, corners and rust. The ATIE 8-inch 80-tooth two-pack is the most direct match for woody brush in this group, and the CZS and CGNRONEAU options suit users who want a combined head or a small blade set. Keep the guard in place, power off during changes, and follow each listing’s engine-size warning.
For more on how these tools differ, read Brush Cutter vs String Trimmer: Which Does What before you choose a blade. If your main question is which whole machine to buy, see Top 10 Battery Powered Weed Eaters: 6 Real Picks Compared.
