Best Universal Pole Saw Replacement Blades
As an Amazon Associate we earn from qualifying purchases.
A universal pole saw replacement blade is only universal up to the point where its mounting holes match your saw head. That is the first thing to check, because most listings in this set describe fit in different ways. This roundup compares eight replacement blades from the listings we have, grouped by blade length, tooth style and the models each listing names, so you can see which blades claim a broad fit and which are built for one brand of saw.
Quick answer
- Check the hole pattern before you check anything else. The listings say a blade fits “most” saws, but only the mounting holes on your current blade and saw head can confirm the fit.
- For a broad-fit option, the Fanno Universal Double-Hook 17-inch blade says its universal hole pattern fits most saw handles and pole saw heads.
- For a brand-matched replacement, the Fiskars, Corona and Jameson listings name specific models, so match the model number on your saw first.
- For a hook-style blade, the Marvin and Fanno tri-edge options both describe a hook that holds the blade in the cut.
How a replacement blade is measured and matched
A pole saw replacement blade has three parts that decide whether it works: the overall length, the cutting arc and the mounting pattern. Overall length is the easiest to compare, and the listings give it in inches. The cutting arc describes how far the curve of the blade reaches, and several listings state a cut length that differs from the overall length, such as the Fanno 17-inch blade with a 14-inch curved cut. The mounting pattern is where most fit problems happen, and it is the part a title alone cannot settle.
Start by taking the old blade off and looking at the holes. Count them, measure their spacing and note whether the blade has a hook at one end. Then compare those holes with the photo and the bullet text in each listing. The All That Garden universal listing asks buyers to compare the holes in the picture with their own pruner pole before buying, which is the right habit for any blade in this set. If the holes do not match, the blade will not seat properly, however the title reads.
Comparison at a glance
| Blade (listing) | Length or cut stated | Teeth and steel stated | Fit note in the listing |
|---|---|---|---|
| Fanno Universal Double-Hook Pole Saw Blade | 17 inches, 14-inch curved cut | 5.5 teeth per inch, tri-edge, carbon steel, hard chrome | Universal hole pattern fits most saw handles and pole saw heads |
| All That Garden Universal Type Saw Blade | Not stated | Whetstone-sharpened teeth, hard chrome plated, listed hardness HV about 950 to 1,000 | Compare the holes with your pole before buying |
| Corona AC7241 13-inch Pole Saw Replacement Blade | 13 inches, curved | Three-sided impulse hardened teeth, tempered steel alloy | Listed under Corona pruning saws and pole saw blades |
| Fiskars 15-inch WoodZig Replacement Blade | 15 inches | WoodZig teeth, high-speed steel | Fits Fiskars pruner models 6391, 9388, 9390, 7889, 7831 and 8391 |
| Fiskars 15-inch Extendable Pole Saw Replacement Blade | 15 inches, double-grind | Hardened blade, cuts on pull and push | For the Fiskars 9394 12-foot telescoping pruning saw |
| Fanno Tri-Edge Hook Type Blade 15-1/2-inch | 15.5 inches overall, 13-inch curved cut | 6 teeth per inch, tri-edge, premium carbon steel | Replacement for the No. 20 Pole Saw |
| Jameson SB-16TE 16-inch Barracuda Tri-Cut Blade | 16 inches | Hard chrome plated, impulse hardened teeth, tri-cut | Compatible with Jameson poles and hand saws |
| Marvin Tri Edge A-B1S21 Pole Saw Blade with Hook | 13 inches | 6 teeth per inch | Hook helps hold the blade in the cut |
Where a listing does not state a value, the table says “not stated” and the text below does not fill the gap with guesses. The Fanno universal blade and the All That Garden blade both use “universal” wording, but the listings give different fit notes, so read both before choosing.
The blades one by one
Fanno Universal Double-Hook Pole Saw Blade, 17 Inch
This is the longest blade in the set, with a 17-inch overall length and a curved cut of 14 inches. The listing describes tri-edge teeth at 5.5 teeth per inch, with sharpened hooks at the top and bottom. The carbon steel is ground to a razor edge and impulse hardened to hold that edge, and the title adds a hard chrome finish. The listing says the universal hole pattern fits most saw handles and pole saw heads, including Fanno models. The double-hook design is the feature to check: a hook at each end can help the blade stay in the cut, but it also needs room on the pole head. This is the best candidate in the set if you want a long blade and a broad fit claim, provided the holes match your saw.
All That Garden Universal Type Saw Blade for Pole Pruners
This listing is the most explicitly universal in wording. The bullets say it suits the tree pruner models of most brands, and they tell the buyer to compare the holes on the picture with the pruner pole before purchase. The listing gives a steel hardness of about HV 950 to 1,000 and says the teeth are sharpened on a whetstone, which the listing contrasts with saw teeth sharpened by machine. The blade has a hard chrome plated finish that the listing says is rust-proof and smooth-cutting. The listing does not give a blade length, so measure your old blade before ordering. Because the fit is described as universal, the hole check matters more here than with a brand-named blade.
Corona AC7241 13-Inch Pole Saw Replacement Blade
The Corona blade is a 13-inch curved tempered steel alloy blade. The listing says it cuts twice as fast as conventional saws, which is a seller claim that the listing does not support with a test or measurement. The teeth are three-sided and impulse hardened, which the listing describes as razor sharp. Corona lists this as a pole saw blade that is also used on pruning saws, so the title covers more than one tool. Check the model number on your saw before buying, because the bullets name Corona blades rather than a universal fit. For a Corona saw, this is the most direct replacement in the set.
Fiskars 15-Inch WoodZig Replacement Saw Blade
This Fiskars blade is designed for Fiskars extendable pruner models, and the listing names six model numbers it fits: 6391, 9388, 9390, 7889, 7831 and 8391. The 15-inch blade uses WoodZig teeth, and the listing says the high-speed steel construction holds its edge through frequent use on tough wood. The title and bullets describe it as a replacement for Fiskars pruners, so it is a brand-matched choice rather than a universal one. If your saw is one of the listed models, this is the simplest choice in the set. If it is not, do not assume it fits, because the listing does not claim wider compatibility.
Fiskars 15-Inch Extendable Pole Saw Replacement Blade
This Fiskars blade is listed as a replacement for the Fiskars 9394 12-foot telescoping pruning saw. The 15-inch blade is double-ground, which the listing says lets it cut on both the pull and push strokes. It is hardened to hold a sharp edge longer. The listing names one saw model, so the fit is narrow but clear. Because the blade cuts on both strokes, it may suit users who prefer a fast cut, but the listing does not compare its speed with the other blades. This is the right choice for the 9394 and nothing else in this set.
Fanno Tri-Edge Hook Type Blade, 15-1/2 Inch
This Fanno blade is listed as a genuine fit replacement for the No. 20 Pole Saw. The overall length is 15.5 inches and the curved cutting edge is 13 inches. The listing gives six teeth per inch in a tri-edge pattern and describes premium carbon steel ground to a razor edge. The hook design is the feature to note: the hook is part of the blade and must match the hook on your saw head. If you own a No. 20 pole saw, this is the most specific replacement in the set. If you do not, check the hook geometry against your saw before ordering.
Jameson SB-16TE 16-Inch Barracuda Tri-Cut Replacement Blade
The Jameson SB-16TE is a 16-inch tri-cut blade with hard chrome plating and impulse hardened teeth. The listing says the tri-cut design gives cleaner cuts with less wear on the blade. The blade is described as compatible with Jameson poles and hand saws, which makes it a brand-matched choice. The listing is short on other specs, so confirm the mounting holes against your Jameson head before buying. Jameson also sells a three-pack of the same blade under a separate listing, which may suit a yard with several saws, though the blade itself is the same. The listing gives the country of origin as Taiwan.
Marvin Tri Edge A-B1S21 Pole Saw Replacement Blade with Hook, 13 Inch
The Marvin blade is a 13-inch tri-edge blade with a hook that the listing says helps hold the blade in the cut. It has six teeth per inch and is described as durable and lightweight, and the listing calls it professional grade. The listing does not name specific saw models, so the fit depends on the mounting holes and the hook shape. The listing does not say which saw heads it suits, so check the hole count before buying.
Closer look: the Fanno 17-inch blade in depth
The Fanno 17-inch is the most complete blade listing in the set for buyers who want a broad fit. Its 17-inch overall length gives a 14-inch curved cut, which the listing states separately. The universal hole pattern is the feature the listing leads with, and it says that pattern fits most saw handles and pole saw heads, including Fanno. The teeth are tri-edge at 5.5 per inch, with hooks sharpened at the top and bottom. The carbon steel is ground to a razor edge and impulse hardened, and the title adds a hard chrome finish. The listing does not state a weight, so compare it with your old blade. Because the listing sells the blade as universal, the first step is still the hole check on your own saw. If the holes match and the hook geometry suits your head, the 17-inch blade gives the longest cut in this set.
Which blade for which job
The listings in this set run from 13 to 17 inches. The longest curved cuts are on the Fanno 17-inch and the Fanno 15-1/2-inch, and the 13-inch Corona and Marvin blades have the shortest curve. For a saw you already own from Fiskars, Jameson or Corona, the brand-matched listings are the safer route than a universal one.
Mistakes to avoid
- Buying on the word “universal” alone. The listings give different fit notes, and the hole pattern decides the fit.
- Ignoring the hook. A hook-style blade needs a hook-style head, and the listing for each blade shows which design it uses.
- Skipping the length check. Compare the overall length and the cut length with your old blade before ordering.
- Trusting a seller claim about speed. The Corona listing says it cuts twice as fast, but the listing does not give a test to support it.
- Mixing brands without checking the model. The Fiskars listings name specific models, and a blade for one Fiskars model may not fit another.
FAQ
Is there a universal pole saw replacement blade that fits every saw?
No listing in this set says it fits every saw. The Fanno 17-inch and the All That Garden blade use universal wording, but both listings tell the buyer to check the hole pattern against the saw head. A universal claim is a starting point, not a guarantee.
How long should a replacement blade be?
Match the length of the blade you are replacing. The listings range from 13 inches to 17 inches. The Fanno 17-inch gives a 14-inch curved cut, the Fanno 15-1/2-inch gives a 13-inch curved cut, and the Jameson is a 16-inch tri-cut blade.
What does tri-edge or tri-cut mean?
Tri-edge and tri-cut describe a tooth pattern with three cutting faces on each tooth. The Fanno tri-edge and the Marvin blade both describe tri-edge teeth, and the Jameson describes a tri-cut blade. The listings state the teeth per inch, which ranges from 5.5 to 6 in this set.
Are the blades made of the same steel?
No. The listings name carbon steel, high-speed steel, tempered steel alloy and a hard chrome finish. The Fiskars WoodZig uses high-speed steel, the Fanno blades use carbon steel, and the Corona uses tempered steel alloy. The listings describe hardness and sharpening differently, so compare the wording rather than assume.
Can I use a blade made for a pruner on a pole saw?
Some listings cover both. The Corona AC7241 is listed under pruning saws and pole saw blades, and the All That Garden blade is described for tree pruner models. Check the saw head type and the mounting pattern before you decide, because the listings do not give a full compatibility table.
Bottom line
If your saw is a named brand, buy a blade from that brand’s matching listing, because the model numbers are the surest fit. If you want a broad-fit option, the Fanno 17-inch is the longest blade with the most specific universal claim, but only after you check the hole pattern. Whatever you choose, measure the holes and the length of your old blade before you order.
Related reading
Before changing a blade, read How to Use a Pole Saw Safely. For the cutting technique that a new blade is meant for, see How to Prune Branches With a Pole Saw.
