Best Pole Saw Blades for Clean Pruning Cuts Today
As an Amazon Associate we earn from qualifying purchases.
The best pole saw blades for clean pruning cuts depend on three things: the saw the blade fits, the bar or blade length, and how far you need to reach. The six cordless models below cover a range of reach and battery platforms. None of these listings sells a stand-alone replacement blade, so each entry reports the blade, bar or chain facts its listing states, along with reach, battery fit and included parts. Read the battery and charger notes before you order, because several of these are bare tools.
Quick answer
- For a kit with a battery and charger, the CRAFTSMAN V20 8 ft pole saw lists both, with rust resistant alloy steel blades.
- For spare blades in the box, the BuyJoy combo lists two extra SK5 replacement blades, but it is a pruner and mini chainsaw kit rather than a full pole saw.
- For the longest listed reach, the Paxwrenx three-section setup lists up to 15 feet and the Gisam combo lists up to 14.92 feet.
- Check the battery and charger first, because the Paxwrenx, Houselife and CRAFTSMAN CMCCSP20B listings are tool only.
What the blade means on these saws
On a cordless pole saw, the cutting part is a chain that runs around a short guide bar at the top of the pole. Some listings call that part a blade, and others list a blade material, blade shape or blade length in their specification sheets. The chain size, the bar length and the tensioning system decide how the saw cuts through a branch, and they are the facts worth comparing. This roundup reports those facts from each listing and leaves out any detail that a listing does not state. Where a listing is silent, the table below says “not stated” rather than filling the gap.
How to choose a pole saw blade setup
Start with reach. Each listing gives either a pole length or a total reach, and the numbers change with the number of pole sections and with the height of the person using the saw. The Paxwrenx listing gives 12.5 feet with a two-section pole and 15 feet with three sections, both measured with the user height included. The CRAFTSMAN CMCCSP20B lists up to 14 feet with its extension pole, and the Houselife listing gives a total reach of up to 14.8 feet.
Next, check the bar or blade length. The Paxwrenx and Houselife listings both describe an 8-inch chain bar. The BuyJoy saw uses a 6-inch chain, which suits smaller limbs. The Gisam kit lists a 23-inch blade length in its specification sheet, but the sheet does not say which of its heads that length belongs to, so treat that figure with care.
Then check the battery platform. The two CRAFTSMAN models use the V20 platform, the Paxwrenx listing names DeWalt 20V MAX packs, and the Houselife listing names Milwaukee M18 packs. The BuyJoy kit ships with 21V 4.0Ah packs. The Gisam listing says it ships with dual 4.0Ah batteries but does not name a platform. A battery from one platform does not fit another, so match the pole saw to the packs you already own or plan to buy.
Finally, check the chain tensioning and oiling. Three listings describe tool-free chain tensioning: Paxwrenx, Houselife and Gisam. Paxwrenx and Houselife both describe an automatic oiler, and both state that the oil is not included. Plan to buy bar and chain oil separately for both of those saws.For a how-to on making the cut itself, read How to Prune Branches With a Pole Saw before you start.
Comparison table of the six models
The table lists only what each listing states. A dash means the listing does not give that fact.
| Model | Blade or bar | Reach | Battery and charger |
|---|---|---|---|
| CRAFTSMAN CMCPPR320D1 (B0DVTGL5VD) | Rectangular alloy steel blade, non-stick coated | 8 ft pole that folds | Battery and charger included; title says 2 Ah, a bullet says 1.5 Ah |
| Paxwrenx EF-20PS-001 (B0H3GST2VM) | 8-inch chain bar, 3/8 inch LP pitch, .043 inch gauge | 12.5 ft with 2 sections, 15 ft with 3, with user height | Bare tool; DeWalt 20V MAX packs |
| BuyJoy BJ602 (B0GV36TN8P) | 6-inch chain saw; pruner blade 3 inches | Pole up to 9.5 ft | Two 4.0Ah batteries and charger included |
| CRAFTSMAN CMCCSP20B (B094BNV95Z) | Rectangular high speed steel blade | Up to 14 ft with extension pole | Tool only; V20 platform |
| Houselife CYCPCS01E (B0FY1HZSRN) | 8-inch low-kickback chain, flat stainless steel blade | Total up to 14.8 ft; pole 7.4 to 8.8 ft | Bare tool; Milwaukee M18 packs |
| Gisam YL-82 (B0GXFKSR9Y) | SK5 blade, 23-inch blade length in specs | Up to 14.92 ft | Dual 4.0Ah batteries; charger not stated |
Six pole saws and pole chainsaw kits
CRAFTSMAN V20 8 FT Cordless Pole Saw, CMCPPR320D1
This is the only model in the set whose listing includes both a battery and a charger. The title names a 2 Ah battery, while one of the bullets lists a 1.5 Ah battery, so confirm which pack is in the box before you buy. The listing gives an 8-foot pole that folds for storage and transport, a seven-position lateral pivoting head, and a tool-less blade change. The blades are described as rust resistant alloy steel with a non-stick coating that the listing says helps prevent sap buildup. The listing states up to 900 cuts per charge and a 3-year limited warranty. The kit is described as part of the V20 system, so the battery belongs to a wider tool line. Choose this model if you want a complete kit and do not need reach beyond about 8 feet.
Paxwrenx 8-Inch Cordless Pole Saw for DeWalt 20V MAX, EF-20PS-001
The Paxwrenx listing is for a bare tool. The battery and charger are not included, and the listing names DeWalt 20V MAX compatibility, including the DCB200, DCB201, DCB203, DCB204, DCB230 and DCB240 packs. The chain runs on an 8-inch bar with 62 teeth, a 3/8 inch low profile pitch, .043 inch gauge and 33 drive links, and the listing says the chain speed reaches up to 18 feet per second. The SDS system tensions the chain without tools, and an automatic oiler feeds the bar and chain, but the oil is not included. The pole comes in two or three sections, with total reach of 12.5 feet or 15 feet, both measured with user height. The listing states a 3-year limited warranty, a 1-year full replacement and a 90-day return period. This model fits a buyer who already owns DeWalt 20V batteries and wants one of the longest reaches in this set. For a closer look at this model, see the Paxwrenx 8-Inch Cordless Pole Saw Review for DeWalt.
BuyJoy 4-in-1 Electric Pruning Shears and 6-Inch Pole Saw Combo, BJ602
This kit is a combination rather than a single pole saw. It includes electric pruning shears, a 6-inch cordless pole saw, a telescopic pole that the listing says extends up to 9.5 feet, two 21V 4.0Ah batteries and a fast charger. The package lists two extra SK5 replacement blades for the pruning shears, plus two chains, one of them already mounted on the saw, and a sharpening stone. The shears use a Teflon coated SK5 blade, and the listing states a cutting diameter of up to 1.8 inches. The saw chain is lubricated by an automatic oiling system. The listing says the shears enter sleep mode after one minute of inactivity, which helps save battery. The listing points to small branches, shrubs and thin twigs, so the reach and the 6-inch bar make this kit a fit for smaller work rather than tall limbs. It is the only listing here that names spare blades in the box.
CRAFTSMAN V20 Pole Saw, CMCCSP20B (Tool Only)
This is a tool-only pole chainsaw on the V20 platform. The included components list a pole chainsaw, an extension pole and a wrench, so you need a V20 battery and charger from your own tools. The listing gives an extended reach of up to 14 feet with the extension pole, an angled head and blade for precise cuts, and a soft grip on the pole extension. The blade is described as high speed steel with a rectangular shape. The listing says the saw delivers up to 325 cuts per charge, and it notes an integrated hook that hangs the tool on the VersaTrack wall system, which is sold separately. The listing gives the weight as 10 pounds. Pick this model if you already own V20 batteries and want a reach near 14 feet without buying a complete kit.
Houselife 8-Inch Cordless Pole Saw for Milwaukee M18, CYCPCS01E
The Houselife listing is for a bare tool that fits Milwaukee M18 18V packs. The battery and charger are not included, and the listing recommends a battery rated 4.0Ah or higher for the best cutting power. The pole telescopes from 7.4 to 8.8 feet, with a total reach of up to 14.8 feet. A four-position head pivots up to 45 degrees, which the listing says helps you reach over fences and into tight branch structures. The 8-inch low-kickback chain uses tool-free tensioning, and an auto-oiler keeps the bar and chain lubricated, with the oil not included. The blade is listed as stainless steel with a flat shape. The listing states a weight of 7 pounds and a 1-year limited warranty. This is a good match for a Milwaukee M18 owner who wants a lighter tool than the CRAFTSMAN CMCCSP20B, which the listing gives as 10 pounds, and who has a 4.0Ah or larger pack on hand.
Gisam 6-in-1 Cordless Pole Saw and Pole Hedge Trimmer Combo, YL-82
This combo kit covers several heads according to its title, including an 8-inch brushless chainsaw, a 16-inch electric hedge trimmer and 6-inch grass shears. The listing says the kit ships with dual 4.0Ah batteries, and the specification sheet lists a 1000-watt brushless motor. The chain speed is listed at 38.5 feet per second, and the pole reaches up to 14.92 feet. The head pivots 180 degrees with five lockable positions, and the listing says the chain tension is adjusted without tools. The specification sheet gives an SK5 blade material and a 23-inch blade length, without naming which head that length belongs to. The listing gives a weight of 2.54 pounds. It does not state a charger or a warranty length. Choose this kit if you want one pole for pruning and hedge work, and check the charger and warranty with the seller before you order.
Mistakes to avoid
- Buying a bare tool and assuming a charger is in the box. The Paxwrenx, Houselife and CRAFTSMAN CMCCSP20B listings are tool only.
- Matching batteries by voltage alone. The listings name DeWalt 20V MAX, Milwaukee M18 and V20 packs, and each platform has its own battery.
- Choosing by bar size alone. A 6-inch chain on a 9.5-foot pole and an 8-inch chain on a 12.5 to 15-foot pole are built for different jobs, so match the saw to the branches you cut.
- Running the chain without oil. Two listings use automatic oilers, and both say the oil is not included.
- Assuming a listing gives a warranty or charger detail that it does not state. Check the listing before you buy.
Which model for which job
If you own no batteries yet, choose a kit with a battery and charger. The CRAFTSMAN CMCPPR320D1 and the BuyJoy combo both list those parts. If you already own a battery platform, a bare tool lets you skip a second battery, provided the platform matches. The DeWalt 20V MAX fit belongs to the Paxwrenx model, the Milwaukee M18 fit belongs to the Houselife model, and the V20 fit belongs to the two CRAFTSMAN models. For high branches that you cannot reach from the ground, the three-section Paxwrenx setup and the Gisam combo list the longest reach. For shrubs and thin branches, the BuyJoy kit is the smallest in the set.
Think about storage as well. The CRAFTSMAN CMCPPR320D1 listing says its 8-foot pole folds for storage, and the BuyJoy kit includes a shoulder strap and a telescopic pole. Measure the space where the saw will live before you choose a pole length, because the folded or telescoped length is what has to fit.
FAQ
Does this roundup list a replacement blade for a pole saw?
No. The listings in this set sell complete pole saws or combo kits. The BuyJoy kit is the only listing that names spare SK5 replacement blades, and those are for its pruning shears. The other listings give blade material, shape or length in their specification sheets, but they do not sell a stand-alone blade. If you need a replacement chain for a particular saw, check the model number in the listing and confirm the bar length before you buy.
Which pole saw in this set has the longest reach?
The Paxwrenx listing gives the highest figure, with total reach of 15 feet on a three-section pole, measured with user height. The Gisam combo lists up to 14.92 feet, the Houselife listing gives up to 14.8 feet, and the CRAFTSMAN CMCCSP20B gives up to 14 feet. Your real reach depends on your height and on how many pole sections you extend. Do not plan a cut at the top of the range without a stable footing.
Do these pole saws come with a battery?
Some do. The CRAFTSMAN CMCPPR320D1 includes a battery and charger, and the BuyJoy kit includes two 4.0Ah batteries and a charger. The Gisam listing says dual 4.0Ah batteries are included but does not name a charger. The Paxwrenx, Houselife and CRAFTSMAN CMCCSP20B listings are tool only, so you need a compatible battery and charger from your own tools.
What chain size do these saws use?
The Paxwrenx listing gives the most detail: an 8-inch chain bar, 3/8 inch low profile pitch, .043 inch gauge and 33 drive links. The Houselife listing describes an 8-inch low-kickback chain, and the BuyJoy saw uses a 6-inch chain. The CRAFTSMAN and Gisam listings do not give a pitch or gauge for their chains, so check the owner manual or the saw itself before ordering a replacement chain.
Are these pole saws safe to use near power lines?
None of the listings says they are safe near power lines, and none gives a clearance distance. Keep well clear of overhead wires, follow the manual, and ask a qualified electrician or arborist before you work near power lines or on large limbs. This is general safety guidance and not a claim made by any listing in this set.
Is a pole saw better than a ladder for pruning?
A pole saw lets you cut from the ground, which many people prefer for branches within reach of the pole. The listings give reach figures from about 8 feet to 15 feet, and every reach figure depends on the pole length and the user height. For branches beyond the top of the pole, or for work that needs a secure footing, a qualified tree service is the safer option. Choose the pole saw for the branches you can reach from the ground and leave the rest to a professional.
Bottom line
Choose a pole saw by reach, battery platform and whether a charger is included. If you need spare blades in the box, the BuyJoy combo is the only listing in this set that names them. For a complete kit with a battery and charger, the CRAFTSMAN V20 model is the simplest choice. For the longest reach, compare the Paxwrenx three-section setup with the Gisam combo, after you confirm the battery you will use and whether a charger comes in the box.
For related guidance on the same tools, read How to Use a Pole Saw Safely before your first cut.
