Jameson Pole Saw Review for Homeowners
As an Amazon Associate we earn from qualifying purchases.
The Jameson pole saw is a manual tool: a 13 inch tri-cut blade on a hand-operated head, mounted to a pole you push and pull by hand. Jameson sells the saw as a folding unit, as a replacement head for its fiberglass poles, and as kits with two or three poles, a pruner and a rope. This review centers on the folding Jameson pole saw and compares it with the kit and head listings in the same brand family. It explains what each listing states and where the listings leave gaps.
Quick answer
- The folding Jameson pole saw has a 13 inch Barracuda tri-cut blade, weighs 1.6 pounds and folds to 34.25 inches long, per its listing.
- Choose a kit if you need poles as well as a saw. The kits pair the saw head with fiberglass poles and, in some cases, a pruner and a rope.
- Choose a replacement head if you already own Jameson fiberglass poles.
- No listing in this group states a warranty length, so check with the manufacturer before you buy.
What a manual pole saw does
A manual pole saw is a hand saw on a long handle. You do not need a battery, fuel or a cord. You place the blade against the limb, pull the saw toward you with the pole, and let the teeth do the cutting. Manual saws are quiet and light, which suits homeowners who trim a few limbs a season. They are slower than powered saws on thick wood, so they fit light to moderate pruning best.
The Jameson line uses a 13 inch blade in most listings and a 16 inch blade in one kit. The blade is the most important part of the tool because it sets the cut size and the cutting speed. The pole sets the reach. The head holds the blade and, in some listings, a hook or a pruner.
How to choose between a folding saw, a head and a kit
Start with what you already own. If you have no poles, a folding pole saw or a kit with poles is the practical starting point. If you already have Jameson fiberglass poles, a replacement head saves money. The listings say directly whether the head is compatible with Jameson poles, so match the head to your existing pole before ordering.
Next, think about reach. Kits in this group list pole combinations from 6 feet up to 18 feet of total reach. The FG-11K kit uses one base pole and two extension poles for a stated maximum of 18 feet. The LS-6PKG-5 kit uses two 6 foot poles for 12 feet total. The folding pole saw is a compact tool with no separate pole list in its listing, so its reach depends on the pole you attach it to.
Then decide whether you want a pruner. Several kits include a pruner on a rope, which lets you cut small limbs and reach the cut from the ground. Pruners are useful for smaller branches, while the saw handles thicker limbs. If you only need one tool for thick limbs, the saw head alone is enough.
Specs the listings give
| Listing | Blade | Poles and length | Extras stated |
|---|---|---|---|
| Jameson folding pole saw (B0CXKJ2YMD) | 13 in. Barracuda hard chrome plated tri-cut | Folding design, no pole list | Blade cover, weight 1.6 lb, folded 34.25 in. long |
| Jameson PS-3FP pole saw head (B0038TMQVQ) | Center blade mount | Fits Jameson fiberglass poles | Die-cast aluminum, integrated hook |
| Jameson PS-3FPS1 head kit (B009R4JI9Y) | 13 in. Barracuda tri-cut | Converts extension poles | Aluminum head, integrated hook |
| Jameson FG-6PKG-1 kit (B006ERQZKW) | 13 in. tri-cut | Two 6 ft fiberglass poles | Bypass pruner, 1-1/4 in. side cut, 20 ft rope |
| Jameson LS-6PKG-5 kit (B006WBIC9M) | 13 in. tri-cut | Two 6 ft poles, 12 ft total | Double pulley pruner, snap-in ferrules |
| Jameson FG-11K kit (B00KZ4FHBI) | 16 in. Teflon-coated | One base and two extension poles, 18 ft maximum | 1 in. center cut pruner, canvas scabbard, 20 ft rope |
Where a listing gives no figure, the table leaves the cell as the listing states it.
Review: the Jameson folding pole saw in depth
The folding Jameson pole saw is the simplest product in this group. It is a hand tool with a 13 inch Barracuda blade in hard chrome plated steel, and the listing describes it as a folding pole saw and hand saw. Its folded length of 34.25 inches and weight of 1.6 pounds make it easy to carry in a bag or stow in a vehicle. The listing describes the design as lightweight and says it outperforms traditional pole saws with leather scabbards, though the pack does not give a test figure for that claim.
The blade is the main working part. The listing names it a Barracuda tri-cut blade in hard chrome plated steel, and the chrome plating is the feature the listing points to for durability. Keep the blade clean after use, and store it with the cover on so the teeth are not dulled by contact with other tools.
The blade cover is listed as a safety feature. It shields the cutting edge when the saw is not in use, which protects you and protects ropes, harnesses and other gear from damage during storage and climbing. Use the cover every time you carry the saw or set it down.
The listing says the saw is compatible with Jameson poles. That is the key compatibility question. A folding saw with no pole list must attach to a Jameson pole through the correct ferrule or adapter, so check the pole’s connection before buying the saw. If you own a different brand of pole, the listing does not state that the saw will fit, so confirm the fit first.
The listing gives the power source as manual, with no motor, battery or fuel. That matters for maintenance: you do not change oil, charge a battery or replace a fuel filter. The main care task is blade maintenance. Clean the blade after use, check the teeth for damage, and replace the blade when the teeth no longer cut cleanly.
The listing says the warranty information must be requested from the manufacturer. That means you should keep your receipt and contact the company directly if you have a problem. Do not assume a warranty exists without confirming it.
Comparing the replacement heads
The PS-3FP head (B0038TMQVQ) is a center blade mount in die-cast aluminum. The listing says it uses a secure mounting pin and adapter for quick, tool-free blade replacement, and it includes an integrated hook for pulling down loose limbs. It is designed for Jameson fiberglass poles and is described as low profile for dense foliage. Choose it if you already own Jameson fiberglass poles and want a head with a hook built in.
The PS-3FPS1 kit (B009R4JI9Y) is a similar head sold with a 13 inch Barracuda blade. The listing describes it as converting any compatible extension or base pole into a pole saw, which is a broader claim than the PS-3FP listing makes. Read the compatibility line in the listing before you buy, and confirm that your pole is one of the compatible types. The listing also describes a high-speed steel blade and a corrosion-resistant saw head.
Comparing the pole kits
The FG-6PKG-1 kit (B006ERQZKW) is the simplest complete set. It includes a 6 foot base pole, a 6 foot extension pole, a pruner, a saw head, a pole adapter, the 13 inch blade and a 20 foot rope. The poles are hollow fiberglass with a 0.125 inch wall. The pruner is a bypass type with a 1-1/4 inch side cut capacity. Choose it if you want a complete kit with a pruner and a rope for light to moderate reach.
The LS-6PKG-5 kit (B006WBIC9M) uses a double pulley pruner and a 13 inch tri-cut saw. The listing says the rope snaps into the pole’s ferrule without tools, and the poles can be used separately or snapped together for 12 feet total. Choose it if you want the pulley pruner and the ability to use one pole on its own.
The FG-11K kit (B00KZ4FHBI) is the longest reach in this group. It has one 6 foot base pole and two 6 foot extension poles, for a stated maximum of 18 feet. Its saw blade is 16 inches with a Teflon coating, and the pruner is a 1 inch center cut type. The listing includes a canvas pole saw scabbard and a 20 foot pruner rope. It also says the poles are batch tested to 100 kV per foot for five minutes to meet OSHA requirements. Choose it if your limbs are high and you want the most reach in the Jameson line.
Safety notes from the listings
The PS-3FP listing says the head is not for use near live wires. That is the most important safety point in the group, and it applies to every pole saw. Keep the tool well away from overhead electrical lines. If a limb touches a line, call the utility company or a qualified electrician rather than attempting the cut.
Use the blade cover when the saw is not in use, and keep the blade sharp so you do not need to force the cut. Stand on stable ground, keep bystanders out of the drop zone and wear eye protection. Do not climb a ladder with a manual pole saw, because a fall is a far greater risk than a limb.
When you cut, let the saw do the work rather than pushing hard against the limb. Forcing a manual saw can bind the blade and cause the pole to slip, so take steady strokes and keep your footing set before each cut.
Mistakes to avoid
- Buying a head without checking that it fits your existing pole.
- Forgetting the blade cover, which exposes the teeth during carry.
- Choosing the longest kit when your limbs are within 12 feet.
- Cutting near power lines because the limb looks small.
- Assuming a warranty exists without confirming it with the manufacturer.
FAQ
How heavy is the Jameson folding pole saw?
The listing gives a weight of 1.6 pounds for the folding pole saw. The weight of the complete kits is not stated in the pack.
What blade does the Jameson pole saw use?
Most listings use a 13 inch Barracuda tri-cut blade in hard chrome plated steel. The FG-11K kit uses a 16 inch blade with a Teflon coating.
Will the folding saw fit my pole?
The listing says it is compatible with Jameson poles. For a different brand, the pack does not confirm compatibility, so check the pole’s connection before buying.
How far can a Jameson pole saw reach?
The FG-11K kit states a maximum of 18 feet with three poles. The LS-6PKG-5 kit states 12 feet total. The folding saw’s reach depends on the pole it is attached to.
Does the kit include a pruner?
Several kits do. The FG-6PKG-1, LS-6PKG-5 and FG-11K listings include pruners. The folding pole saw and the replacement heads do not list a pruner.
Is the Jameson pole saw safe to use near power lines?
No. The PS-3FP listing says it is not for use near live wires. Keep every pole saw well clear of electrical lines and call a professional if a limb touches a line.
Bottom line
Choose the folding Jameson pole saw if you already own compatible poles and want a light, manual saw with a blade cover. Choose a kit if you need the poles and a pruner, and pick the kit length by the height of your limbs. For the longest reach, the FG-11K kit is the listed option. Check the warranty directly with Jameson before you buy, because no listing in this group states one.
For safe technique with a pole saw, read how to use a pole saw safely. For the cutting method on overhead limbs, see how to prune branches with a pole saw.
