Best Electric Pole Saws for Pruning Tree Work
As an Amazon Associate we earn from qualifying purchases.
An electrical pole saw in this roundup means a battery-powered pole saw, because every listing in the pack runs on a battery and none is a corded model. This page compares eight of them, using only the figures each listing states for reach, chain size, battery status and warranty. Where a listing is silent on a point, the article says the listing does not state it, so you can see at a glance which numbers are solid and which you need to check yourself.
Quick answer
- Every electric pole saw here is battery powered. Check whether the battery and charger are in the box, because several listings are bare tools.
- Stated total reach runs from about 12.5 ft to 15.9 ft for the longer-pole models, and the pole length you buy sets how high you can cut from the ground.
- The 8-inch bar is the most common size in this group, and it is the size that the listings tie to pole-saw cutting on branches of several inches.
- Warranty terms differ widely, from a 1-year limited warranty to a 3-year limited warranty, so compare the warranty line for the exact model you choose.
What “electrical” means in this list
Pole saws are sold in corded, battery and gas versions, and the search term “electrical” usually points to the first two. The eight models here are all battery powered. Some use a 20V-class battery from DeWalt, Milwaukee or Craftsman platforms, and others come with their own pack. The practical question is not whether the tool is electric, but which battery you will charge and whether that battery is already in your garage.
Reach: how high each pole saw goes
Reach is the first number most buyers want, and the listings state it in different ways. The Paxwrenx model gives 12.5 ft for a two-section pole and 15 ft for three sections, both figures including the user height. The AVADA listing gives up to 15.9 ft, based on a 6-foot person extending the saw straight at shoulder height. The Houselife listing gives a total reach of up to 14.8 ft. The HEINPRO listing gives 14.2 ft at shoulder height for a 6-foot user. The Craftsman 14 ft model states up to 14 ft with its extension pole. The Gisam combo lists 14.92 ft. The Craftsman 8 ft model’s title gives its pole length, and its listing says the pole folds for transport and storage, but the listing does not give a total reach figure for it.
Use these numbers as the manufacturer’s stated reach, not as a promise for your own height or a tree’s growth pattern.
Chain size and cutting speed
Most of the saws use an 8-inch bar. The Paxwrenx and HEINPRO listings both give a 3/8-inch pitch chain, with the HEINPRO model listing 0.050-inch gauge and 33 drive links. The Paxwrenx listing states 0.043-inch gauge and 33 drive links, and it gives a maximum chain speed of 18 ft/s. The AVADA model states a chain speed of up to 38 ft/s, and the Gisam combo states 38.5 ft/s for its saw. These are listing claims that depend on the battery and the load, so compare them as numbers from the same kind of source rather than as measured results.
Batteries: included or not
This is where the listings differ most, and it affects the total price of ownership more than the tool itself. The Paxwrenx, HEINPRO, AVADA and Houselife models are bare tools, and the listings say the battery and charger are not included. The Greenworks 40V kit includes its 2.0Ah battery and charger. The Gisam combo includes two batteries. The Craftsman 8 ft model includes a 1.5Ah battery and charger in its kit. The Craftsman 14 ft model is listed as tool only, so it needs a V20 battery. Before you compare any two saws, decide which battery you own and read the included-components line.
Warranty terms
Warranty language varies across these listings. The Paxwrenx listing names a 90-day return, a 1-year full replacement and a 3-year limited warranty. The Greenworks 40V kit states a 3-year warranty. The Craftsman 8 ft model states a 3-year limited warranty, and the Houselife listing states a 1-year limited warranty. The HEINPRO listing describes a limited warranty without a stated length. The AVADA listing names a standard customer support warranty, without a stated period. Read the warranty line for the exact model you plan to order, because the listing wording is not always consistent across sellers.
How to choose an electric pole saw
Start with the battery you already own. A pole saw that uses the same battery platform as your drill or trimmer costs less to run. Next, match the reach to your tallest target. Add a margin if the branch sits above the 6-foot user height used in the listing. Then decide between a bare tool and a kit. A bare tool is cheaper only if you already have a compatible battery and charger. A kit is simpler, but it may include a battery you do not need. Finally, check the warranty line and the included accessories such as a shoulder strap or extension pole.
The eight electric pole saws in this roundup
Paxwrenx 8-inch cordless pole saw for DeWalt 20V Max, bare tool
The Paxwrenx saw is a bare tool, and its listing says the battery and charger are not included. It is compatible with DeWalt 20V MAX batteries, including the DCB200 and DCB204 models named in the listing. The listing gives a total reach of up to 12.5 ft with a two-section pole and up to 15 ft with three sections. The bar is 8 inches, and the chain speed is up to 18 ft/s. The listing says the saw can cut up to 90 cuts per charge on 4×4 pressure-treated timber with a 4.0Ah battery. It has a 90-degree cutting angle and tool-free chain tensioning, and it has an automatic oiler, but the listing says the oil is not included. The listing describes a 90-day return, a 1-year full replacement and a 3-year limited warranty.
Greenworks 40V 8-inch pole saw and pole hedge trimmer kit
The Greenworks kit is a two-tool combo. It includes an 8-inch pole saw and a hedge trimmer head with a 20-inch blade, and the listing says the battery and charger are included. The battery is a 40V lithium-ion pack rated 2.0Ah. The listing describes a 7-position pivoting head for the trimmer and an automatic oiler for the pole saw chain. It also lists easy adjust tensioning for the chain. The item weighs 11 pounds according to the listing. The manufacturer warranty is stated as 3 years. Because the trimmer head is part of the kit, this model suits buyers who want both functions in one purchase, rather than a saw only.
Houselife 8-inch cordless pole saw for Milwaukee M18
The Houselife saw is a bare tool. The listing says the battery and charger are not included, and it recommends a battery rated 4.0Ah or higher, noting that a lower-capacity battery may reduce performance. It is compatible with Milwaukee M18 18V batteries. The telescoping pole extends from 7.4 to 8.8 ft, with a total reach of up to 14.8 ft. The head has four positions and a cutting angle listed at 45 degrees. The saw uses an 8-inch low-kickback chain, with tool-free tensioning and an automatic oiler, and the listing says the oil is not included. The item weighs 7 pounds, and the listing gives a 1-year limited warranty.
HEINPRO 8-inch cordless pole saw for DeWalt 20V
The HEINPRO saw is a bare tool for DeWalt 20V MAX batteries, and the listing says the battery and charger are not included. The detachable extension pole gives an operating reach of 5.8 to 8.2 ft, and the listing says the saw reaches a maximum cutting height of 14.2 ft at shoulder height for a 6-foot user. The 8-inch guide bar uses a 3/8-inch pitch chain with 0.050-inch gauge and 33 drive links. The listing describes an automatic oiling mechanism for the chain and bar, a dual-side safety lock trigger for left- or right-handed use, and an adjustable shoulder strap. The item weighs 6.7 pounds. The listing describes a limited warranty without a stated length.
AVADA 2-in-1 cordless 8-inch pole saw and chainsaw for DeWalt 20V MAX
The AVADA kit is a 2-in-1 tool. It combines an 8-inch and a 6-inch electric chainsaw with an extension pole, and the listing says the chainsaw can be removed from the pole for close work. The listing says the telescoping pole adjusts from 5.6 ft to 9.9 ft, with a total reach of up to 15.9 ft for a 6-foot user. The head adjusts across a 0 to 180-degree range. The listing gives a 1200W figure, a brushless motor and a chain speed of up to 38 ft/s. It includes a tool-free chain tensioner and an auto-lube system, and the listing says the oil is not included. The package is tool only, with the battery and charger sold separately, and the item weighs 5.7 pounds. The listing gives a standard customer support warranty without a stated period.
Gisam 6-in-1 cordless pole saw and pole hedge trimmer combo kit
The Gisam kit is the widest tool set in this group. It includes a pole saw, a grass shear head, a hedge trimmer head and a second battery, with the listing saying that dual 4.0Ah batteries are included. The listing gives a 14.92 ft extended reach and a 1000W brushless motor with a chain speed of 38.5 ft/s for the saw. The hedge trimmer head has a 16-inch blade. The head pivots through 180 degrees with five lockable positions, and the listing says the saw supports tool-free chain tension adjustment. The listing states a weight of 2.54 lbs for the kit, but the specification sheet does not give a separate figure, so check the weight before you rely on it. The listing does not state a warranty length.
Craftsman V20 8 ft cordless pole saw with battery and charger
The Craftsman 8 ft model is the kit in this group that includes a battery and charger, according to its listing. It uses a 1.5Ah V20 lithium-ion battery and a V20 charger. The pole folds to 8 ft for transport and storage. The listing describes a seven-position lateral pivoting head, a tool-less blade change and alloy steel blades with a non-stick coating. It states up to 900 cuts per charge, with a footnote that the figure is the listing’s own. The listing gives a weight of 4.94 kg and a 3-year limited warranty. The listing’s kit description refers to a pruner as well as a pole saw, so read the title and the included list to confirm which configuration you are buying.
Craftsman V20 cordless pole saw with extension pole, tool only
The second Craftsman model is a tool-only pole saw in the V20 system. Its listing states a reach of up to 14 ft with the extension pole. It has an angled head for precise cuts, a soft grip on the pole extension and an integrated hook for hanging the tool on a VERSATRACK wall system, which is sold separately. The listing says the saw can make up to 325 cuts per charge, with a footnote. The package includes a pole chainsaw, an extension pole and a wrench. The listing does not include a battery or charger, so you need a V20 battery of your own. The item weighs 10 pounds.
Mistakes to avoid
- Buying a bare tool without a compatible battery. Four of the eight listings say the battery and charger are not included, so the real price depends on the battery you already own.
- Trusting the reach figure without checking your height. Most listings state reach for a 6-foot user at shoulder height, and the listings do not all use the same measurement.
- Assuming the chain speed is comparable across listings. The figures come from different tests and claims, and the listings do not give a shared method.
- Buying a blade or a manual saw by mistake. Search results for pole saws often include replacement blades and folding manual saws, which are not electric models. Check the title for “Cordless Pole Saw” or a similar powered description.
FAQ
Are all of these pole saws electric?
Yes. Each listing in this roundup is battery powered. None is corded, and none is gas.
Which pole saw gives the most reach?
The AVADA listing states up to 15.9 ft for a 6-foot user, and the Paxwrenx three-section setup states up to 15 ft. The figures use different assumptions, so check the stated user height before comparing them.
Do I need a battery to start?
Not if you buy a kit. The Greenworks kit, the Gisam combo and the Craftsman 8 ft model include a battery and charger. The other listings are tool only or bare tool, so you need a compatible battery.
What chain size should I look for?
Most listings in this roundup use an 8-inch bar. The Paxwrenx listing gives 3/8-inch pitch and 33 drive links, which is the same drive-link count the HEINPRO listing gives. Match the chain to the replacement chains you plan to buy.
Will these handle thick limbs?
The Houselife listing describes cutting through thick brush and hardwood, but it does not give a maximum branch diameter, and most of the other listings give none for the saw itself. Use a larger tool or a manual saw for heavy limbs, and check the listing for the branch size you expect to cut.
Is the warranty the same on every model?
No. The warranty figures in this roundup range from a 1-year limited warranty to a 3-year limited warranty, and several listings give no period. Read the warranty line for the exact model before you buy.
Bottom line
Pick the electric pole saw that uses the battery you already own, then choose the reach that clears your tallest target with margin. If you need a battery and charger in the box, look at the Greenworks, Gisam or Craftsman 8 ft kits. If you already have a compatible battery, a bare tool such as the Paxwrenx, Houselife, HEINPRO or AVADA model can keep the price down. Check the warranty line before you order.
For safety and cutting technique with a pole saw, read How to Use a Pole Saw Safely. For cut planning on overhead branches, see How to Prune Branches With a Pole Saw.
