Best Chainsaw Pole Saws for Trimming Branches
As an Amazon Associate we earn from qualifying purchases.
A chainsaw pole saw is a cordless mini chainsaw that clicks onto a telescoping pole, so one tool can cut low limbs by hand and high limbs from the ground. The chainsaw head is typically 6 or 8 inches of guide bar, and the pole adds reach overhead. Most models in this group run on lithium batteries, and most list an automatic oiler and a tool-free chain tensioner. The eight options below are the ones whose listings describe a pole saw that also works as a handheld chainsaw. Each entry uses the reach, power, chain and kit facts the listing states.
Quick answer
- For a 2-in-1 kit with two 4.0Ah batteries and a 16-foot reach, the Supstable and Autubin listings are close matches on the stated specs.
- For a tool-only saw that uses a battery you already own, the AVADA DeWalt, AVADA Milwaukee and Ecarke DeWalt listings are the three options in this group.
- For the highest chain speed stated in the group, the Gisam listing gives 38.5 feet per second, the Supstable listing 30 feet per second, and the Autubin listing 26.2 feet per second.
- Check the reach figure against your height, because most listings give a total reach based on a 6-foot user.
How to choose a chainsaw pole saw
Start with the guide bar length, because it sets the size of branch you can cut. The listings in this group use 6-inch, 8-inch and 10-inch bars. The Supstable listing names both a 6-inch and an 8-inch bar. The Autubin listing gives an 8-inch chain with a 1/4-inch pitch and .043-inch gauge, and 46 drive links. The Gisam listing describes a 23-inch blade length for its kit. A longer bar cuts a larger limb in one pass, but it is heavier at the tip of the pole.
Next, look at reach. The listings state reach in three ways: the pole length, the total reach based on a 6-foot user, and the pole range from one length to another. The BROVR listing gives a 13.5-foot maximum reach. The Supstable and Autubin listings give 16 feet. The Ecarke listings give up to 16 feet, and the ANJOSISSEL listing gives 13.2 feet. For high work, compare the total reach figure and add your own height if you are shorter or taller than 6 feet.
Then decide on the battery. Several listings in this group are tool-only and need a battery from a named brand. The AVADA DeWalt, Ecarke DeWalt and ANJOSISSEL listings name DeWalt 20V MAX packs. The AVADA Milwaukee and Ecarke Milwaukee listings name Milwaukee 18V packs. The Autubin, Supstable and BROVR listings include batteries, and the Gisam listing includes two 4.0Ah batteries. If you do not own a compatible battery, pick a kit that includes one.
Power, speed and chain
Power is the second thing to compare. The Supstable listing gives 800 watts and a chain speed of 30 feet per second. The Autubin listing gives 1200 watts and a chain speed of 26.2 feet per second. The Gisam listing gives 1000 watts and a chain speed of 38.5 feet per second. The AVADA listings give 1200 watts and state an auto-lube system that runs the chain at up to 38 feet per second. The BROVR listing gives 600 watts and a chain speed of 20 feet per second. Chain speed is a stated value, not a measured one, so use it to compare listings in the same family rather than as an exact cutting rate.
Chain size matters for replacement. The Gisam listing names an SK5 blade and a 23-inch blade length. The AVADA listings name an alloy steel blade with a 6-inch or 8-inch bar. The Supstable and BROVR listings include a spare chain. If you plan to keep the saw for years, check that a replacement chain of the right pitch and gauge is easy to find for your model.
Auto-oiling and tool-free tension
Most of the listings here describe an auto-oiling system. The Supstable listing names a 30-milliliter leak-proof oil tank with a transparent window. The Ecarke listings describe a transparent oil reservoir. The ANJOSISSEL listing describes a transparent oil tank and an intelligent power display. Auto-oiling keeps the chain lubricated during use, but you still need to fill the reservoir and check the level before a job. The AVADA and Autubin listings describe tool-free chain tensioners, which speed up chain adjustment.
Roundup: eight chainsaw pole saws
1. Gisam 6-in-1 Cordless Pole Saw and Pole Hedge Trimmer Combo
This is a six-tool kit: a pole saw, a grass shear, a hedge trimmer and an extension pole, with an 8-inch brushless chainsaw as the core. The listing states a 1000W brushless motor and a chain speed of 38.5 feet per second. The pole reaches up to 14.92 feet, and the 180-degree head has five lockable positions. The listing includes two 4.0Ah batteries and weighs 2.54 pounds for the hedge trimmer. The kit is a good match if you want one power head for both trees and hedges. View on Amazon
2. AVADA 2-in-1 Cordless 8-inch Pole Saw and Chainsaw for DeWalt 20V MAX (Tool Only)
This tool-only kit works with DeWalt 20V MAX batteries, and the listing names several compatible models. The battery and charger are not included. The saw converts from an 8-inch and 6-inch mini chainsaw to a pole saw without tools. The pole reaches up to 15.9 feet based on a 6-foot person. The listing states a 1200W brushless motor, a 0 to 180-degree adjustable head and an auto-lube system. The kit includes a shoulder strap, gloves, goggles and a brush. View on Amazon
3. Supstable Electric Pole Saw and Mini Chainsaw with 6-inch and 8-inch Bars
The Supstable kit includes a 6-inch and an 8-inch guide bar, two 4000mAh batteries and a charger. The listing says the pole reaches up to 16 feet and that the kit runs up to 100 minutes on a single set of batteries, which is a claim the listing makes and not a figure this review checked. It has 800 watts, a 30 feet per second chain speed and a 30-milliliter oil tank. The listing names a 2-year manufacturer warranty and includes a spare chain, a chain protective sleeve, a pole belt and an oil bottle. It weighs 10 pounds. View on Amazon
4. Autubin Brushless 2-in-1 Cordless Pole Saw and Mini Chainsaw, 8-inch
The Autubin kit comes with two 4.0Ah 21V batteries and a 1200W pure copper brushless motor. The listing gives a chain speed of 26.2 feet per second and an 8-inch chain with a 1/4-inch pitch and .043-inch gauge, with 46 drive links. The telescopic pole extends from 4 feet to 9 feet and reaches up to 16 feet based on a 6-foot user. The head adjusts from 0 to 180 degrees. The listing says the chainsaw on its own cuts low branches, and the pole attaches for overhead work. The item weighs 6.9 pounds. View on Amazon
5. BROVR 2-in-1 Pole Saw and Mini Chainsaw, 8-inch Battery Powered
The BROVR kit is the lightest-powered listing in this group, at 600 watts, with a chain speed of 20 feet per second. It includes two 21V 2000mAh batteries and a charger. The listing describes four extension rods that reach 13.5 feet total, a 135-degree rotating head and a double safety lock. The package includes a spare chain, a screwdriver, goggles, gloves, a shoulder harness and an empty oil bottle. The listing states a 5-year machine warranty. The item weighs 3 kilograms. Choose it for lighter work and a shorter reach. View on Amazon
6. AVADA 2-in-1 Cordless 8-inch Pole Saw and Chainsaw for Milwaukee M18 (Tool Only)
This is the Milwaukee M18 version of the AVADA kit. The battery and charger are not included, and the listing names several Milwaukee M18 pack models. It has the same 8-inch and 6-inch mini chainsaw, a telescopic pole that adjusts from 5.6 to 9.9 feet, and a total reach of up to 15.9 feet based on a 6-foot person. The listing states a 1200W brushless motor and an auto-lube system that runs at up to 38 feet per second. The kit includes an oil bottle, a cleaning brush, a screwdriver, a manual, a shoulder strap, gloves and glasses. View on Amazon
7. ANJOSISSEL 2-in-1 Cordless 8-inch Pole Saw and Chainsaw for DeWalt 20V
The ANJOSISSEL kit is a tool-only 8-inch cordless chainsaw that mounts on a telescoping pole. The listing names DeWalt 20V MAX packs such as DCB200 and DCB246 as compatible. The removable chainsaw head can be used on its own, and the pole extends from 5.4 to 7.2 feet, for a total reach of up to 13.2 feet based on a 6-foot person. The listing states a second-generation brushless motor, an auto-oiling system with a transparent oil tank and an intelligent power display. The listing says it includes 12 months of after-sales service. It weighs 6 pounds. View on Amazon
8. Ecarke Electric Pole Saw Compatible with DeWalt 20V (Tool Only)
This Ecarke tool-only saw is compatible with DeWalt 20V batteries, and the listing names several models, including DCB246, DCB248 and DCBP520. The pole extends from 7 to 10 feet, for a total reach of up to 16 feet based on a 6-foot user. The 8-inch saw has a listed chain speed of 26 feet per second and an auto-lubrication system with a transparent oil tank. The kit includes a stabilizer handle, a spare chain, a guide bar cover, a shoulder strap, goggles, gloves and a branch hook. The item weighs 6.8 pounds. View on Amazon
Review: the Autubin 2-in-1 saw in depth
The Autubin is the most fully specified listing in this group, so it is the one to read closely. It is a two-part tool: an 8-inch mini chainsaw that works alone, and a pole that turns it into a pole saw with a 0 to 180-degree head. The listing says the pole extends from 4 feet to 9 feet and reaches up to 16 feet based on a 6-foot user. The listing also says the kit can be used with the chainsaw alone for trimming low branches or cutting firewood.
Power and runtime are the strongest stated features. The listing gives 1200 watts from a brushless motor and a chain speed of 26.2 feet per second. It includes two 4.0Ah 21V batteries, and the listing says alternating between them supports up to 120 minutes of trimming. That runtime is the manufacturer’s statement and should be read as a claim, not a measured result. The LED display is said to show remaining battery power at a glance.
The chain specification is the part most buyers will check. The listing gives an 8-inch chain with a 1/4-inch pitch, .043-inch gauge and 46 drive links. The listing describes the cutting surface as 8 inches, which it says is double a 4-inch saw and 33 percent more than a 6-inch saw. It also says the chain is high-speed steel. When you buy a replacement chain, match the pitch, gauge and drive-link count to the listing, because those three numbers decide whether a chain will fit.
The listing says the kit includes a pole and the batteries, and its item details name a pole, a chainsaw and two 21V batteries. It weighs 6.9 pounds, which is in the middle of this group. Two items are not stated in the listing: the charger model and a warranty term. Confirm both with the seller before you buy if they matter to you.
Two close alternatives from this roundup fit different needs. The Supstable kit is the closest match on reach and battery count, and it adds a 6-inch bar and a 2-year warranty. The BROVR kit is lighter and has a 135-degree head, but it states 600 watts and a shorter reach of 13.5 feet, so it suits lighter work.
FAQ
What is a chainsaw pole saw?
A chainsaw pole saw is a mini chainsaw that attaches to a telescoping pole. You can use the chainsaw alone for low cuts or add the pole for high cuts. The listings in this group describe that two-part design.
How far can a chainsaw pole saw reach?
The listings state reach in different ways. The Autubin and Supstable listings give up to 16 feet, the Ecarke listings give up to 16 feet, and the BROVR listing gives 13.5 feet. The figures are usually based on a 6-foot user, so adjust for your height.
Do I need to buy a battery?
It depends on the listing. The Autubin, Supstable, BROVR and Gisam listings include batteries. The AVADA, ANJOSISSEL and Ecarke listings are tool-only and say that batteries and chargers are not included.
What chain size should I use?
Use the chain that matches your guide bar. The Autubin listing states an 8-inch chain with 1/4-inch pitch, .043-inch gauge and 46 drive links. The replacement chain listings in this category name pitch, gauge and drive-link count, so match all three to your bar.
Is a chainsaw pole saw safe to use overhead?
Use it with the safety features your listing states, such as a safety switch or a double safety lock, and keep the blade clear of your body. Wear the goggles and gloves the kit includes. Read the separate guides on pole saw safety before you start a high cut.
How do I keep the chain oiled?
Most listings describe an auto-oiling system with a transparent oil tank. Fill the tank before each session and check the window. The listings do not state an oil change schedule, so follow the manual that comes with your saw.
Bottom line
Choose a chainsaw pole saw by reach, battery and chain size. If you want a kit with batteries and a long pole, the Autubin and Supstable listings are the closest matches. If you already own a DeWalt or Milwaukee battery, choose the matching tool-only listing. Check the pitch, gauge and drive-link count before you buy a replacement chain.
Internal links
For a close look at one kit, read the AUTUBIN 2-in-1 8-inch cordless pole saw review. For safe overhead cutting, see how to use a pole saw safely.
